11B NMR Research Articles

Chiral Induction in 2D Borophene Nanoplatelets through Stereoselective Boron-Sulfur Conjugation.

Chirality is a structural metric that connects biological and abiological forms of matter. Although much progress has been made in understanding the chemistry and physics of chiral inorganic nanoparticles over the past decade, almost nothing is known about chiral two-dimensional (2D) borophene nanoplatelets and their influence on complex biological networks. Borophene's polymorphic nature, derived from the bonding configurations among boron atoms, distinguishes it from other 2D materials and allows for further customization of its material properties. In this study, we describe a synthetic methodology for producing chiral 2D borophene nanoplatelets applicable to a variety of structural polymorphs. Using this methodology, we demonstrate feasibility of top-down synthesis of chiral χ3 and β12 phases of borophene nanoplatelets via interaction with chiral amino acids. The chiral nanoplatelets were physicochemically characterized extensively by various techniques. Results indicated that the thiol presenting amino acids, i.e., cysteine, coordinates with borophene in a site-selective manner, depending on its handedness through boron-sulfur conjugation. The observation has been validated by circular dichroism, X-ray photoelectron spectroscopy, and 11B NMR studies. To understand how chiral nanoplatelets interact with biological systems, mammalian cell lines were exposed to them. Results showed that the achiral as well as the left- and right-handed biomimetic χ3 and β12 borophene nanoplatelets have distinct interaction with the cellular membrane, and their internalization pathway differs with their chirality. By engineering optical, physical, and chemical properties, these chiral 2D nanomaterials could be applied successfully to tuning complex biological events and find applications in photonics, sensing, catalysis, and biomedicine.

Diverse Reactivity of Amidinate-Supported Boron Centers with the Hypersilyl Anion and Access to a Monomeric Secondary Boron Hydride.

Diverse reactivity of the bulky tris(trimethylsilyl)silyl substituent [Si(SiMe3)3], also known as the hypersilyl group, was observed for amidinate-supported dichloro- and phenylchloroborane complexes. Treatment of the dichloroborane with potassium tris(trimethylsilyl)silyl led to the activation of the backbone β-carbon center and formation of saturated four-membered heterocyclic chloroboranes R'{Si(SiMe3)3}C(NR)2BCl [R' = Ph, R = Cy (3); R' = Ph, R = iPr (6); R' = tBu, R = Cy (8)], whereas the four-membered amidinate hypersilyl-substituted phenyl borane 4 {PhC(NCy)2B(Ph)[Si(SiMe3)3]} was observed for the case of an amidinate-supported phenylchloroborane. The highly deshielded 11B NMR spectroscopic resonance and the distinct difference in the 29Si NMR spectrum confirmed the presence of a σ-donating hypersilyl effect on compounds 3, 6, and 8. Reaction of 3 with the Lewis acid AlCl3 led to the formation of complex 11 in which an unusual cleavage of one of the C-N bonds of the amidinate backbone is observed. Nucleophilic substitution at the boron center of saturated chloroborane 3 with phenyllithium generated the phenylborane derivative 12, whereas the secondary monomeric boron hydride 13 was observed after treatment with alane (AlH3). All compounds (2-13) have been fully characterized by NMR spectroscopy and single-crystal X-ray structure determination studies.

Synthesis of new representatives of A3B-type carboranylporphyrins based on meso-tetra(pentafluorophenyl)porphyrin transformations.

A carboranylporphyrin of A3B-type bearing a single pentafluorophenyl ring was prepared through the regioselective nucleophilic aromatic substitution reaction of the p-fluorine atoms in 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin with 9-mercapto-m-carborane. The reaction of this porphyrin with sodium azide led to the selective substitution of the p-fluorine atom in the pentafluorophenyl substituent with an azide functionality which upon reduction with SnCl2 resulted in the formation of the corresponding porphyrin with an amino group. Pentafluorophenyl-substituted A3B-porphyrins were studied and transformed to thiol and amino-substituted compounds allowing for the preparation of porphyrins with different reactive groups such as hydroxy and amino derivatives capable for further functionalization and conjugation of these porphyrins to other substrates. In addition, conjugates containing maleimide or biotin entities in the structure of carborane A3B-porphyrin were also synthesized based on the amino-substituted A3B-porphyrin. The structures of the prepared carboranylporphyrins were determined by UV-vis, IR, 1H, 19F, 11B NMR spectroscopic data and MALDI mass spectrometry.

Difluoroboron Complexes Based on Benzimidazole-Phenolates as Blue Emitters.

Novel four-coordinated boron complexes (1-5) were synthesized via a reaction between BF3·CH3OH and benzimidazole-phenolate ligands (L1-L5), which are N,O-donors. These complexes exhibit intense blue emission in the solution and solid states accompanied by notable fluorescence quantum yields (ΦF). The study of the structure-property relation, through theoretical and experimental approaches, revealed a distinctive trend where compounds incorporating electron-donating substituents (methyl and ethoxy groups) in the phenolate moiety manifest shifts in emission wavelengths across the blue spectrum, concomitant with an increase in ΦF. Furthermore, the incorporation of an aromatic ring into the benzimidazole moiety considerably intensifies the rate of radiative relaxation from excited states. Notably, in the solid phase, either as a crystalline powder or loaded into polymer films, these modified complexes maintain or even surpass ΦF values observed in molecular solutions, ranging from 0.18 to 0.57, depending on the substitution. This characteristic makes these compounds attractive for applications in optoelectronics. All of the compounds were characterized using 1H, 13C, 11B, and 19F NMR, elemental analysis, and the molecular structures were corroborated through single-crystal X-ray diffraction analysis. Computational calculations via time-dependent density functional theory further elucidate the tunability of optical bandgaps through group substitution on ligands, aligning well with experimental observations.

Study of the Reversible Hawthorne Rearrangement between Isomeric Forms of the Octadecahydroeicosaborate Anion Using Dynamic 11B NMR Spectroscopy

Study of the Reversible Hawthorne Rearrangement between Isomeric Forms of the Octadecahydroeicosaborate Anion Using Dynamic 11B NMR Spectroscopy

Interaction of electrolyte molecules with the surface of porous carbon: NMR study

Electrochemical double-layer capacitors use porous carbons as the electrode material, and improving their performance requires an understanding of the electrolyte−carbon surface interactions. 13C, 14N, and 11B NMR spectroscopy were used to investigate the behaviour of the electrolytes [C(OCH3)3NH3]+Cl- and [N(CH2CH3)]+BF4- on the surface of porous carbon in D2O solutions. A chemical shift of 13C has been found in the fragments N–C, indicating electron density redistribution between nitrogen atoms and alkyl fragments. The presence of a signal with a chemical shift of d = 7.7 confirms the structuring of the electrolytic layer of water solution [N(CH2CH3)]+BF4-.

Tunable luminescent properties and structure of Sn2+-doped boroaluminate glasses

A series of novel Sn2+ doped boroaluminate glasses were prepared by the traditional melt quenching method in this work. Their glass network structure, luminescent properties, and mechanisms were studied in detail. The main framework of the glass network was dependent on the glass network former (B2O3) and intermediate (Al2O3), and was characterized by the 11B and 27Al NMR spectra. Broadband tunable blue-violet emissions ranging from 320 to 550 nm were realized by regulating the glass network structure through optical basicity. The quantitative relationship between optical basicity and emission/excitation peak positions and intensities, FWHM, and Stokes-Shift of this Sn2+-doped glass were revealed, according to which the luminescent properties of Sn2+ could be modulated and even predicted in the future. This work will enrich our understanding of the luminescent properties of Sn2+ ions and the variations of glass network structure, guiding the design of efficient and tunable luminescent boroaluminate glass.

Synthesis and Energetic Characterization of Borane-Amines on High-Nitrogen Heterocycles.

Borane-amines have garnered attention over the last several decades in a variety of applications, ranging from hydrogen storage materials to hypergolic fuel systems. An investigation into the synthesis of borane-amines with high-nitrogen content heterocycles was undertaken in this work. Borane-amines were formed by the reaction of BH3·Me2S in tetrahydrofuran (THF) with the requisite nitrogen-containing heterocycle and isolated by placing the crude reaction mixture in hexanes to precipitate the product. X-ray crystallography, thermogravimetric analysis (TGA), high resolution mass spectroscopy (HRMS), 1H NMR, 13C NMR, and 11B NMR were utilized for product characterization, while impact and friction sensitivity testing were conducted to identify sensitivity in the synthesized compounds. Most isolated borane-amines, except one, were found to decompose in the atmosphere and were more sensitive to mechanical stimuli than their starting materials; however, all synthesized compounds were found to be hypergolic in the presence of white fuming nitric acid (WFNA).

Exploiting the Strained Ion-Pair Interactions of Sterically Hindered Pyridinium Salts Toward SN2 Glycosylation of Glycosyl Trichloroacetimidates.

We demonstrate here that strained and sterically hindered protonated 2,4,6-tri-tert-butylpyridinium (TTBPy) tetrafluoroborate, a crystalline, bench stable salt serves as a mild and efficient organocatalyst for the SN2 type displacement of glycosyl trichloroacetimidates toward the stereoselective synthesis of both α- and β-glycosides. The strained ion-pair interactions between the sterically hindered pyridinium cation and the tetrafluoroborate anion infuse unusual reactivity to the ions resulting in the unique anion assisted activation of alcohol. This mild activation of alcohol facilitates the SN2 type displacement of glycosyl α-trichloroacetimidates into β-glycosides in a highly diastereoselective manner. These unique interactions were established based on extensive infrared and 1H, 19F, 11B NMR studies and theoretical studies.

Ferrocenyl carborane conjugates with allyl functionalities: Synthesis and properties

A series of novel hybride ferrocene carborane derivatives containing allyl functionalities at the carborane carbon atoms were firstly synthesized in a good yield providing their potential applications in various fields of material science. Synthesized compounds were characterized using various spectroscopic techniques like IR, ESI-MS, 1H and 11B NMR data. Some compounds were investigated by cyclic voltammetry. The total charge density around each atom was calculated for 1-allyl-9-ferrocenylmethyl-m-carborane. Particular attention has been focused on the analysis of 1H NMR spectra of diallyl-substituted ferrocene carboranes which made it possible to discover the migration of the double bond in allyl substituent and the formation along with diallyl derivative of the corresponding allylpropenyl isomer compounds.

Pyrrole βC-B-N Fused Porphyrins: Molecular Structures and Opto-Electrochemical Studies.

Herein, we report the design, synthesis, structure, and electrochemical study of doubly βC-B-N fused Ni(II) porphyrins (1-trans, 1-cis, 2-trans, and 2-cis). These compounds have been synthesized from A2B2 type dipyridyl Ni(II) porphyrins (Ar=Ph for 1 a; Ar=C6F5 for 2 a) via Lewis base-directed electrophilic aromatic borylation reactions. The solution state structures of these compounds have been established using 1H NMR, 11B NMR, 1H-1H COSY, 1H-13C HSQC, and 19F-13C HSQC NMR techniques. Single crystal X-ray analysis have revealed that 1-trans, 1-cis, and 2-trans adopt ruffled conformations, with alternate meso-carbons on the opposite sides of the mean porphyrin plane. The Soret bands in the absorption spectra of the B-N fused molecules are ~40 nm redshifted compared to unfused Ni(II) porphyrin precursors. The B-N fusion have diminished the redox potential of fused porphyrins. Although 1-trans and 1-cis, show four oxidation processes, 2-trans and 2-cis show only three oxidation processes. DFT studies have revealed that the tetrahedral geometry of the boron has induced a twist in the π-conjugation, which destabilizes the HOMO and stabilizes the LUMO in 1-trans, 1-cis, 2-trans, and 2-cis.

11B NMR of the Morphological Evolution of Traditional Chinese Medicine Borax.

This article applies nuclear magnetic resonance technology to the study of boron-containing traditional Chinese medicine, in order to explore the morphological evolution of boron elements in traditional Chinese medicine. Borax is a traditional Chinese medicine with anti-corrosion, anti-inflammatory, antibacterial, and anticonvulsant effects. It is made by boiling, removing stones, and drying borax minerals like borate salts. This article introduces an 11B nuclear magnetic resonance method for identifying and characterizing boron-containing compounds in TCM. We applied this technology to borax aqueous solutions in different chemical environments and found that with boron mixed in the form of SP2 hybridization in equilateral triangles and SP3 hybridization in equilateral tetrahedra, the pH changes in alkaline environments significantly affected the ratio of the two. At the same time, it was found that in addition to the raw material peak, boron signals of other boron-containing compounds were also detected in 20 commercially available boron-containing TCM preparations. These new boron-containing compounds may be true pharmaceutical active ingredients, and adding them directly to the formula can improve quality and safety. This article describes the detection of 11B NMR in boron-containing traditional Chinese medicine preparations. It is simple, non-destructive, and can provide chemical fingerprint studies for boron-containing traditional Chinese medicine.

Molecular two-point recognition of fructosyl valine and fructosyl glycyl histidine in water by fluorescent Zn(II)-terpyridine complexes bearing boronic acids.

Selective recognition of fructosyl amino acids in water by arylboronic acid-based receptors is a central field of modern supramolecular chemistry that impacts biological and medicinal chemistry. Fructosyl valine (FV) and fructosyl glycyl histidine (FGH) occur as N-terminal moieties of human glycated hemoglobin; therefore, the molecular design of biomimetic receptors is an attractive, but very challenging goal. Herein, we report three novel cationic Zn-terpyridine complexes bearing a fluorescent N-quinolinium nucleus covalently linked to three different isomers of strongly acidified phenylboronic acids (ortho-, 2Zn; meta-, 3Zn and para-, 4Zn) for the optical recognition of FV, FGH and comparative analytes (D-fructose, Gly, Val and His) in pure water at physiological pH. The complexes were designed to act as fluorescent receptors using a cooperative action of boric acid and a metal chelate. Complex 3Zn was found to display the most acidic -B(OH)2 group (pKa = 6.98) and exceptionally tight affinity for FV (K = 1.43 × 105 M-1) with a strong quenching analytical response in the micromolar concentration range. The addition of fructose and the other amino acids only induced moderate optical changes. On the basis of several spectroscopic tools (1H, 11B NMR, UV-Vis, and fluorescence titrations), ESI mass spectrometry, X-ray crystal structure, and DFT calculations, the interaction mode between 3Zn and FV is proposed in a 1 : 1 model through a cooperative two-point recognition involving a sp3 boronate-diol esterification with simultaneous coordination bonding of the carboxylate group of Val to the Zn atom. Fluorescence quenching is attributed to a static complexation photoinduced electron transfer mechanism as evidenced by lifetime experiments. The addition of FGH to 3Zn notably enhanced its emission intensity with micromolar affinity, but with a lower apparent binding constant than that observed for FV. FGH interacts with 3Zn through boronate-diol complexation and coordination of the imidazole ring of His. DFT-optimized structures of complexes 3Zn-FV and 3Zn-FGH show a picture of binding which shows that the Zn-complex has a suitable (B⋯Zn) distance to the two-point recognition with these analytes. Molecular recognition of fructosyl amino acids by transition-metal-based receptors has not been explored until now.

Optical sensing of L-dihydroxy-phenylalanine in water by a high-affinity molecular receptor involving cooperative binding of a metal coordination bond and boronate-diol.

Selective recognition and sensing of catecholamine-based neurotransmitters by fluorescent synthetic receptors capable of operating in pure water is a central topic of modern supramolecular chemistry that impacts biological and analytical chemistry. Despite advances achieved in the recognition of some neurotransmitters such as dopamine, little effort has been invested in the optical recognition of other neurotransmitters of paramount importance in biochemistry and medicinal chemistry such as the drug L-dihydroxy-phenylalanine (levodopa). Herein, a cationic Cu(II)-terpyridine complex bearing an intramolecular fluorescent quinolinium ring covalently linked to phenylboronic acid (CuL1) was synthesized, structurally described by single-crystal X-ray diffraction and studied in-depth as a fluorescent receptor for neurotransmitters in water. The complex CuL1 was designed to act as a receptor for levodopa through two Lewis acids of different natures (Cu(II) and B atoms) as cooperative binding points. The receptor CuL1 was found to have a strongly acidified -B(OH)2 group (pKa = 6.2) and exceptionally high affinity for levodopa (K = 4.8 × 106 M-1) with selectivity over other related neurotransmitters such as dopamine, epinephrine, norepinephrine and nucleosides in the micromolar concentration range at physiological pH. Such levodopa affinity/selectivity for a boronic acid-based receptor in water is still rare. On the basis of spectroscopic tools (11B NMR, UV-vis, EPR, and fluorescence), high-resolution ESI-MS, crystal structure, and DFT calculations, the interaction mode of CuL1 with levodopa is proposed in a 1 : 1 model using two-point recognition involving a boronate-catechol esterification and a coordination bond Cu(II)-carboxylate. Furthermore, a visual sensing ensemble was constructed using CuL1 and the commercial fluorescent dye eosin Y. Levodopa is efficiently detected by the displacement of the eosin Y bound to the Cu(II)-receptor, monitoring its green emission. The use of Cu(II)-boronate complexes for fast and selective neurotransmitter sensing was unexplored until now.

Novel carboranyl-BODIPY conjugates: design, synthesis and anti-cancer activity.

A series of four carboranyl-BODIPY conjugates (o-CB-10, m-CB-15, Me-o-CB-28, and Me-o-CB-35) and one phenylene-BODIPY conjugate (PB-20) were synthesized. The carboranyl-BODIPY conjugates incorporate boron clusters, specifically ortho- and meta-carboranes, covalently linked to BODIPY fluorophores while the phenylene-BODIPY conjugate features a phenylene ring covalently linked to BODIPY fluorophore. The newly synthesized conjugates were characterized by 1H NMR, 13C NMR, 11B NMR, 19F NMR, FT-IR, and high-resolution mass spectral analysis. In vitro cytotoxicity of the synthesized conjugates has been evaluated against the HeLa cervical cancer cell line. The study reveals that o-CB-10 shows a maximum cell death potential at lower concentrations (12.03 μM) and inhibited cell proliferation and migration in cancer (HeLa) cells. Additionally, flow cytometry study reveals that o-CB-10 and Me-o-CB-28 arrest the cell cycle at the S phase. The results indicate that the carboranyl-BODIPY conjugates have the potential to be effective anticancer agents.

Basicity and Stability of Argyrodite Sulfide-Based Solid Electrolytes

Argyrodite-type sulfide-based solid electrolyte Li6PS5Cl (LPSC) holds immense promise for solid-state battery applications. This is attributed to its stable structure and high ionic conductivity. Nonetheless, the persistent challenges involving the instability at the electrode/electrolyte interface and susceptibility to moisture present significant obstacles in material preparation and cell manufacturing processes. Our research has unveiled a noteworthy finding: the sulfur of the PS4 3− moiety is a Lewis-base active site to adsorb Lewis acid. It is found that the adsorption of CO2 on the sulfide electrolytes can enhance both the interfacial and electrochemical stability of the lithium and sulfide electrolyte interface. The formation of new S–CO2 bonds, confirmed using various analytical techniques, plays a pivotal role in modifying the interfacial behaviors of the sulfide electrolytes. Moreover, the LijCO2@LPSCjLTO shows an amazing result, with 62% capacity retention and ultra-high coulombic efficiency of 99.91% after 1000 cycles. Interestingly, the same concept was also applied to the high ionic conductivity sulfide-based superionic conductor Li10GeP2S12 (LGPS) system, which also has the PS4 3− moiety. A novel approach is also developed by utilization of the BBr3 gas as a Lewis base indicator to probe the strength of Lewis basicity of the sulfur sites of sulfide electrolytes. The basicity of the sulfide electrolytes can be correlated to the shift of 11B NMR peak. This correlation is further supported by the H2S generation rate when the electrolyte is exposed to a moisture atmosphere. This work not only provides a new pave towards enhancing stability at the sulfide electrolyte/lithium interface but profound insights into the basicity and moisture stability of sulfide electrolytes.

One-step preparation of bi-layer foamed glass-ceramics using asynchronous oxidization of SiC and B4C

Bi-layer foamed glass-ceramic has the advantages of both dense and foamed structure which lead to low bulk density and high mechanical strength. We propose a new one-step method to produce bi-layer foamed glass-ceramic using the asynchronous oxidization of B4C and SiC. The parent glass is prepared by melting-quenching method, followed by foaming through powder sintering route with addition of B4C and SiC. The bi-layer structure and formation of bi-layers are investigated by scanning electron microscope (SEM), X-ray computed tomography, 11B NMR, and high temperature melting observation system (HTMOS). The results show that during the sintering process, the oxidization of B4C in top layer at low temperature forms boron oxide and helps the formation of glass melt in the top layer. The oxidization of SiC at high temperature leads to foaming in the top layer. The prepared bi-layer foamed glass-ceramic has low bulk density of 1.06 g·cm−3 and high flexural strength of 26.15 MPa.

BF3@K10: An Efficient Heterogeneous Montmorillonite Catalyst for the Halogenation of N-Heterocycles

AbstractHalogenated N-heterocycles are an essential structural building block in medicinal chemistry. Herein, we describe an economical and efficient protocol for the regioselective halogenation of several N-heterocycles (pyrimidines, a pyrazole, 2-aminopyridine, theophylline, and an imidazo[1,2-a]pyridine) with BF3-doped montmorillonite (BF3@K10). The new catalyst was characterized by FTIR and 11B NMR spectroscopy, XRD, SEM, and EDS. The developed strategy provides easy and fast access to iodo-, bromo-, and chloro-N-heterocycles under mild conditions. This method was used to synthesize nine new halogenated pyrimidine derivatives. The reaction is simple and general, affording good to excellent yields of products under conventional heating or microwave conditions in the presence of BF3@K10 as an ecofriendly, inexpensive, and efficient catalyst. This protocol is clearly superior to the conventional route because it offers short reaction times, high yields, and easy workup.

Capturing Sialyl-glycan on Live Cancer Cells by Tailored Boronopeptide.

Boronic acid-containing molecules are substantially popularized in chemical biology and medicinal chemistry due to the broad spectrum of covalent conjugations as well as interaction modules offered by the versatile boron atom. Apparently, the WGA peptide (wheat germ agglutinin, 62-73), which shows a considerably low binding affinity to sialic acid, turned into a selective and >5 folds potent binder with the aid of a suitable boronic acid probe installed chemoselectively. In silico studies prompted us to install BA probes on the cysteine residue, supposedly located in close proximity to the bound sialic acid. In vitro studies revealed that the tailored boronopeptides show enhanced binding ability due to the synergistic recognition governed by selective non-covalent interactions and cis-diol boronic acid conjugation. The intense binding is observed even in 10 % serum, thus enabling profiling of sialyl-glycan on cancer cells, as compared with the widely used lectin, Sambucus nigra. The synergistic binding mode between the best boronopeptide (P3) binder and sialic acid was analyzed via 1 H and 11 B NMR.

Effect of borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate studied using solid-state nuclear magnetic resonance and X-ray diffraction

ObjectivesApatite minerals can have various anions and cations in their crystal structure in addition to phosphate ion (PO₄³⁻) and calcium ion (Ca2+). The aim of this study is to investigate effects of the borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate. MethodsNano-crystalline hydroxyapatite (H-Ap) was obtained from a supersaturated buffered solution containing 4.12 mM HPO42- and 5.88 mM Ca2+ (H-Ap). Four additives were used in solid solution methods: (i) 0.588 mM F- (F-Ap), (ii) 5.88 mM Sr2+ (Sr-Ap), (iii) 4.12 mM BO33- (BO3-Ap), and (iv) a surface pre-reacted glass ionomer (S-PRG) filler eluate that contained 0.17 mM Sr2+, 0.588 mM F-, 11.1 mM BO33-- (SPRG-Ap). Apatite crystallization was investigated using a solid-state magic-angle spinning NMR spectroscopy and X-ray diffraction (XRD) with the Rietveld analysis. ResultsA 2D 1H–31P heteronuclear-correlation NMR showed F- ion incorporation in the apatite structure of the F-Ap and SPRG-Ap. The peaks on the 31P axis of the F-Ap, Sr-Ap, and BO3-Ap were different from that of the H-Ap, and the full width at half maximum increased in the following order: H-Ap∼F-Ap∼BO3-Ap< SPRG-Ap< Sr-Ap, suggesting the incorporation of the F-, Sr2+ and BO33-. The incorporation of F and BO3 was further confirmed by 19F and 11B NMR. The XRD revealed that Sr2+ was preferentially incorporated into the CaII site. SignificanceThe F-, Sr2+ and BO33-ions might be involved in modifying the crystallization of apatite precipitation, producing a variety of apatite. S-PRG filler that release these ions may have an effect on remineralization, i.e., the reformation of apatite lost due to caries.