Aryl Groups Research Articles

Investigation of alkyl, aryl, and chlorinated OPFRs in sediments from estuarine systems: Seasonal variation, spatial distribution and ecological risks assessment

Estuaries in South Africa are very important for biodiversity conservation and serve as focal points for leisure and tourism activities. The organophosphate flame retardants (OPFRs) levels in these aquatic systems haven't been documented in any studies as of yet. Due to the negative effects of persistent organic pollutants in South African estuaries, we examined the occurrence of eight OPFRs in sediments of two estuaries by studying their spatiotemporal distribution, season variation, and ecological risks. The Sundays Estuary (SDE), a semi-urbanized agricultural surrounding system, recorded an ∑8OPFR concentration in sediments that ranged from 0.71 to 22.5 ng/g dw, whereas Swartkops Estuary, a largely urbanized system, recorded a concentration that ranged from 0.61 to 119 ng/g dw. Alkyl-OPFRs were the prevalent homologue in both estuaries compared to the chlorinated and aryl groups. While TBP, TCPP, and TCrP were the most abundant compounds among the homologue groups. There was no distinct seasonal trend of ∑8OPFR concentration in either estuary, with summer and autumn seasons recording the highest concentrations in SDE and SWE, respectively. Ecological risks in the majority of the study sites for the detected compounds were at low (RQ < 0.1) and medium levels (0.1 ≤ RQ < 1) for certain species of fish, Daphnia magna and algae. However, the cumulative RQs for all the compounds had ∑RQs ≥1 for most sites in both estuaries, indicating that these organisms, if present in both estuaries, may be exposed to potential ecological concerns due to accumulated OPFR chemicals. The scope of future studies should be broadened to include research areas that are not only focus on the bioaccumulation patterns of these compounds but also find sustainable ways to reduce them from these estuarine environments.

E-Selective Radical Difunctionalization of Unactivated Alkynes: Preparation of Functionalized Allyl Alcohols from Aliphatic Alkynes.

Radical difunctionalization of aliphatic alkynes provides direct access to valuable multi-substituted alkenes, but achieving a high level of chemo- and stereo-control remains a formidable challenge. Herein a novel photoredox neutral alkyne di-functionalization is reported through functional group migration followed by a radical-polar crossover and energy transfer-enabled stereoconvergent isomerization of alkenes. In this sequence, a hydroxyalkyl and an aryl group are incorporated concomitantly into an alkyne, leading to diversely functionalized E-allyl alcohols. The scope of alkynes is noteworthy, and the reaction tolerates aliphatic alkynes containing hydrogen donating C─H bonds that are prone to intramolecular hydrogen atom transfer. The protocol features broad functional group compatibility, high product diversity, and exclusive chemo- and stereoselectivity, thus providing a practical strategy for the elusive radical di-functionalization of unactivated alkynes.

A Ruthenophosphanorcaradiene as a Synthon for an Ambiphilic Metallophosphinidene.

Reaction of the ruthenium carbene complex Cp*(IPr)RuCl (1) (IPr = 1,3-bis(Dipp)imidazol-2-ylidene; Dipp = 2,6-diisopropylphenyl) with sodium phosphaethynolate (NaOCP) led to intramolecular dearomatization of one of the Dipp substituents on the Ru-bound carbene to afford a Ru-bound phosphanorcaradiene, 2. Computations by DFT reveal a transition state characterized by a concerted process whereby CO migrates to the Ru center as the P atom adds to the π system of the aryl group. The phosphanorcaradiene possesses ambiphilic properties and reacts with both nucleophilic and electrophilic substrates, resulting in rearomatization of the ligand aryl group with net P atom transfer to give several unusual metal-bound, P-containing main-group moieties. These new complexes include a metallo-1-phospha-3-azaallene (Ru─P═C═NR), a metalloiminophosphanide (Ru─P═N─R), and a metallophosphaformazan (Ru─P(═N─N═CPh2)2). Reaction of 2 with the carbene 2,3,4,5-tetramethylimidazol-2-ylidene (IMe4) produced the corresponding phosphaalkene DippP═IMe4.

5‐Aryl Substituted 2‐(2‐Methoxyphenyl)benzoxazoles with Large Stokes Shifts: Synthesis, Crystal Structures and Optical Properties

Abstract2‐(2‐methoxyphenyl)benzoxazole (MBO) displays similar photophysical properties to 2‐(2‐hydroxyphenyl)benzoxazole (HBO), but it lacks the large Stokes shifts necessary for fluorescence microscopy applications. In this paper, we report the 5‐substitution of MBO with aryl groups to produce 2‐(4‐methoxy‐[1,1’‐biphenyl]‐3‐yl)benzoxazoles (MBBOs) with large Stokes shifts. The synthesis of MBBOs 6–15 was accomplished in moderate to good yields by microwave‐assisted Sonogashira cross couplings. Crystal structures for compounds 6–9 and 15 are provided. MBBOs 6–10, 12, and 14 displayed considerably blue‐shifted absorption maxima and slight bathochromic shifts of their fluorescence maxima relative to the unsubstituted MBO.

Synthesis of diverse aryl‐substituted amino propanes

AbstractAmines bearing diverse aryl substituents for potential utilities as energy and new materials have been synthesized from aziridine‐2‐carboxaldehyde and diverse aryl‐containing substrates. At first two aryl groups were to yield (aziridine‐2‐yl)‐1,1‐diaryl‐methane which was converted to 5‐diarylmethyl oxazolidin‐2‐one as a synthetic intermediate. They were further reacted with another aryl group in the presence of methanesulfonic acid to yield 2,3,3‐triarylpropylamine with the possible carbenium ion intermediate. In addition, this reaction with a second additional phenolic aryl group gave rise to the diversely substituted 3‐(4‐methoxyphenyl)‐(2,3‐dihydrobenzofuran‐2‐yl)methanamine derived from the intramolecular aziridine ring‐opening reaction by hydroxy group at phenol.

Tuning Fluorescence and Singlet Oxygen Quantum Yields of Subporphyrazines by Axial Functionalization.

The axial functionalization of Subporphyrazines (SubPzs) with unreported alkoxy groups, carboxy and carboperoxy rests, as well as sulfanyl, aryl and amino groups, forming B-O, B-S, B-C, and B-N bonds, respectively, has been investigated. The studied oxygen nucleophiles include aromatic and sterically demanding aliphatic alcohols, along with carboxylic acids and peracids. In general, direct substitution of the chloro-SubPz by oxygen nucleophiles of diverse nature proceeds smoothly, with yields of the isolated alkoxy and carboxy-substituted SubPzs ranging from 49 to 100 %. Conversely, direct substitution with sulphur, carbon and nitrogen nucleophiles do not afford the corresponding substituted SubPzs. In these cases, a stepwise procedure involving an axial triflate-SubPz intermediate was employed, affording only the phenyl-SubPz in 8 % yield. The major compound under these conditions was the unreported SubPz μ-oxo dimer, presumably arising from substitution of the triflate-SubPz by the in situ generated hydroxy-SubPz. This result indicates a quite low reactivity of the TfO-SubPz intermediate with carbon, sulphur and nitrogen nucleophiles. All SubPzs prepared in this work exhibited fluorescence at 510-515 nm with quantum yields ranging from 0.1 to 0.24. Additionally, all SubPzs generated singlet oxygen, with ΦΔ values ranging from 0.15 to 0.57, which show no apparent correlation with the axial substituents.

Nanocomposites Based on Thermoplastic Acrylic Resin with the Addition of Chemically Modified Multi-Walled Carbon Nanotubes.

The main goal of this work was an improvement in the mechanical and electrical properties of acrylic resin-based nanocomposites filled with chemically modified carbon nanotubes. For this purpose, the surface functionalization of multi-walled carbon nanotubes (MWCNTs) was carried out by means of aryl groups grafting via the diazotization reaction with selected aniline derivatives, and then nanocomposites based on ELIUM® resin were fabricated. FT-IR analysis confirmed the effectiveness of the carried-out chemical surface modification of MWCNTs as new bands on FT-IR spectra appeared in the measurements. TEM observations showed that carbon nanotube fragmentation did not occur during the modifications. According to the results from Raman spectroscopy, the least defective carbon nanotube structure was obtained for aniline modification. Transmission light microscopy analysis showed that the neat MWCNTs agglomerate strongly, while the proposed modifications improved their dispersion significantly. Viscosity tests confirmed, that as the nanofiller concentration increases, the viscosity of the mixture increases. The mixture with the highest dispersion of nanoparticles exhibited the most viscous behaviour. Finally, an enhancement in impact resistance and electrical conductivity was obtained for nanocomposites containing modified MWCNTs.

Synthesis of 2-Amino-N'-aroyl(het)arylhydrazides, DNA Photocleavage, Molecular Docking and Cytotoxicity Studies against Melanoma CarB Cell Lines.

Diacylhydrazine bridged anthranilic acids with aryl and heteroaryl domains have been synthesized as the open flexible scaffold of arylamide quinazolinones in order to investigate flexibility versus rigidity towards DNA photocleavage and sensitivity. Most of the compounds have been synthesized via the in situ formation of their anthraniloyl chloride and subsequent reaction with the desired hydrazide and were obtained as precipitates, in moderate yields. All compounds showed high UV-A light absorption and are eligible for DNA photocleavage studies under this "harmless" irradiation. Despite their reduced UV-B light absorption, a first screening indicated the necessity of a halogen at the p-position in relation to the amine group and the lack of an electron-withdrawing group on the aryl group. These characteristics, in general, remained under UV-A light, rendering these compounds as a novel class of UV-A-triggered DNA photocleavers. The best photocleaver, the compound 9, was active at concentrations as low as 2 μΜ. The 5-Nitro-anthranilic derivatives were inactive, giving the opposite results to their related rigid quinazolinones. Molecular docking studies with DNA showed possible interaction sites, whereas cytotoxicity experiments indicated the iodo derivative 17 as a potent cytotoxic agent and the compound 9 as a slight phototoxic compound.

Pd-Catalysed Direct Arylation of Distyrylbenzene: Strong Dual-state Fluorescence and Electrochromism.

Distyrylbenzenes (DSBs) are well-known for their strong multicolour fluorescence. Fluorescence tuning of DSB via further functionalization/arylation, on the other hand, is uncommon. This paper reports a Pd-catalysed direct arylation approach for introducing different aryl groups onto fluorobenzene-containing DSB moiety (7) in high yields (67-72 %). The versatile methodology allows the substitution of neutral [tolyl (1)], electron-deficient [p-formyl benzene (2), p-acetyl benzene (3), p-nitrobenzene (4)] and electron-rich [carbazole (5), triphenylamine (6)] aryl groups. The electron-deficient aryls render mono-substitution, while the electron-rich counterparts promote di-substitution. The compounds (1-6) show blue, green, and yellow fluorescence in both the solution and solid states; the fluorescence quantum yields reach >98 % and the peak maxima span from 425 to 560 nm. The mono-carbazole DSB (5) exhibit white light emission (WLM) in polar solvents (acetone, DMF, CH3CN, DMSO and NMP) with very high fluorescence quantum yields (φf) of 60-80 %. For WLM, such high efficiency (φf) is somewhat uncommon. Moreover, visible-to-NIR reversible electrochromism is demonstrated by the TPA-integrated DSB (6). The colour of 6 changes from pristine light yellow to orange, and the absorption maxima shifts from 372 to 1500 nm when a positive potential of 1.0 V vs Ag/Ag+ is applied. Moreover, the system shows high colouration efficiency in the NIR region with fast switching speeds for colouration and decolouration as fast as 0.98 s and 1.05 s.

Characterization of Dichloroisoeverninic Acid Biosynthesis and Chemoenzymatic Synthesis of New Orthosomycins.

The orthosomycins are highly modified oligosaccharide natural products with a broad spectrum and potent antimicrobial activities. These include everninomicins and avilamycins, which inhibit protein translation by binding a unique site on the bacterial ribosome. Notably, ribosomal bound structures reveal a network of interactions between the 50S subunit and dichloroisoeverninic acid (DCIE), the aromatic A1-ring conserved across orthosomycins, but the relationship of these interactions to their antimicrobial activity remains undetermined. Genetic functional analysis of three genes putatively associated with DCIE biosynthesis in the everninomicin producer Micromonospora carbonacea delineates the native biosynthetic pathway and provides previously unreported advanced biosynthetic intermediates. Subsequent in vitro biochemical analyses demonstrate the complete DCIE biosynthetic pathway and provide access to novel everninomicin analogs. In addition to the orsellinate synthase EvdD3 and a flavin-dependent halogenase EvdD2, our results identified a key acyltransferase, EvdD1, responsible for transferring orsellinate from the acyl carrier protein domain of EvdD3 to a heptasaccharide orthosomycin biosynthetic intermediate. We have also shown that EvdD1 is able to transfer unnatural aryl groups via their N-acyl cysteamine thioesters to the everninomicin scaffold and used this as a biocatalyst to generate a panel of unnatural aryl analogs. The impact of diverse aryl functional group substitution on both ribosome inhibition and antibacterial activities demonstrates the importance of the DCIE moiety in the pharmacology of orthosomycins, notably revealing an uncoupling between ribosomal engagement and antibiotic activity. Control of A1-ring functionality in this class of molecules provides a potential handle to explore and address pharmacological roles of the DCIE ring in this potent and unique class of antibiotics.

Far-red active unsymmetrical squaraine dyes containing N-arylated indoline donors for dye sensitized solar cells.

Squaraine dyes possess sharp far-red active transition with high extinction coefficient and form aggregates on TiO2 surface. Aggregation of dyes on TiO2 has been considered as a detrimental factor for DSSC device performance, which can be controlled by appending alkyl groups to the dye structures. Hence by integrating alkylated (alkyl groups with both in-plane and out-of-plane) aryl group with indoline moiety to make it compatible with other electrolytes and for controlling the dye-aggregation, a series of squaraine acceptor-based dyes SQA4-6 have been designed and synthesized. SQA4-6 dyes showed absorption between 642 and 653 nm (λmax), photophysical and electrochemical studies indicated that the HOMO energy levels of this sets of dyes are well aligned with the potentials of I-/ and [Co(bpy)3]2+/3+ redox shuttles for better dye regeneration process. DSSC device efficiency of 3% has been achieved for SQA5 dye with iodolyte (I-/ ) electrolyte in the presence of 0.3 mM of chenodeoxycholic acid (CDCA). The IPCE profile of DSSC device fabricated with SQA4-6 dyes indicated the contribution of aggregated structures for the photocurrent generation.

Photoredox‐catalyzed Decyanative Radical Cross‐coupling Reactions of Aromatic Nitriles

Abstract(Hetero)arenes are one kind of important structural motifs existed extensively in clinical pharmaceutics, pesticides, and so on. Developing novel method for introducing (hetero)aryl group through the employment of cheap and abundant feedstocks has attracted considerable attentions from synthetic community. In this review, we summarize the recent advancements in photoredox‐catalyzed decyanative cross‐coupling reactions based on the persistent aromatic nitrile‐derived radical. We separate the review into redox‐neutral and reductive cross‐coupling reactions according to whether an external reducing agent is required. The diverse strategies of overcoming the redox potential limitation of photocatalyst are emphasized in the discussion of specific reaction.

Ni0-Catalyzed Regioselective [2 + 2 + 2] Cyclotrimerization of 1,3-Diynes: An Expeditious Synthesis of Hexasubstituted Alkynyl Benzenes.

In the present work, we demonstrate a regioselective [2 + 2 + 2] cyclotrimerization of 1,3-diynes catalyzed by Ni0 to provide hexasubstituted benzenes (HSBs). HSBs have significant applications as functional materials and pharmaceuticals. The present protocol exhibited remarkable versatility, transforming 1,3-diynes with diverse alkyl, aryl, and heterocyclic groups to the corresponding HSBs. With the help of control experiments and density functional theory (DFT), the mechanism of the reaction and the origin of regioselectivity were elucidated.

Pyridinium‐abgeleitete mesoionische N‐heterocyclische Olefine (py‐mNHOs)

AbstractMesoionische Polarisation ermöglicht den Zugang zu elektronenreichen Olefinen, die als Organokatalysatoren, Liganden oder Nucleophile Anwendung finden. Wir berichten hier über die Synthese und Charakterisierung einer Reihe von 3‐Methylpyridinium‐abgeleiteten mesoionischen Olefinen (py‐mNHOs). Wir verwendeten ein mit DFT‐Rechnungen unterstütztes Designkonzept, das zeigte, dass Arylgruppen an den 1‐, 2‐, 4‐ und 6‐Positionen des heterocyclischen Kerns die kinetische Stabilisierung der neuartigen mesoionischen Verbindungen ermöglicht. Die elektronischen Tolman‐Parameter zeigen, dass py‐mNHOs bemerkenswert starke σ‐Donor‐Liganden für Übergangsmetalle und Hauptgruppen‐Lewis‐Säuren sind. Außerdem gehören sie zu den stärksten Nucleophilen auf der Mayr‐Reaktivitätsskala. Bei Reaktionen von py‐mNHOs mit elektronenarmen π‐Systemen wurde experimentell ein sukzessiver Übergang von der Bildung zwitterionischer Addukte über schrittweise zu konzertierten 1,3‐dipolaren Cycloadditionen beobachtet und durch quantenchemische Rechnungen analysiert.

Pyridinium-Derived Mesoionic N-Heterocyclic Olefins (py-mNHOs).

Mesoionic polarization allows access to electron-rich olefins that have found application as organocatalysts, ligands, or nucleophiles. Herein, we report the synthesis and characterization of a series of 3-methylpyridinium-derived mesoionic olefins (py-mNHOs). We used a DFT-supported design concept, which showed that the introduction of aryl groups in the 1-, 2-, 4-, and 6-positions of the heterocyclic core allowed the kinetic stabilization of the novel mesoionic compounds. Tolman electronic parameters indicate that py-mNHOs are remarkably strong σ-donor ligands toward transition metals and main group Lewis acids. Additionally, they are among the strongest nucleophiles on the Mayr reactivity scale. In reactions of py-mNHOs with electron-poor π-systems, a gradual transition from the formation of zwitterionic adducts via stepwise to concerted 1,3-dipolar cycloadditions was observed experimentally and analyzed by quantum-chemical calculations.

Synthesis of 1‐Adamantylaminogermylene and Its Chalcogenation Reactions

AbstractThe synthesis, isolation, and characterization of 1‐adamantylaminogermylene 1 have been achieved utilizing kinetic stabilization with a bulky aryl group on the germanium atom. Aminogermylene 1 was found to be stable in toluene solution at 110 °C for 3 days without decomposition. The chalcogenation reaction of 1 aiming to synthesize heavy amides gave the head‐to‐tail type dimers of the corresponding heavy amides.

Automated de Novo Design of Olefin Metathesis Catalysts: Computational and Experimental Analysis of a Simple Thermodynamic Design Criterion.

Methods for computational de novo design of inorganic molecules have paved the way for automated design of homogeneous catalysts. Such studies have so far relied on correlation-based prediction models as fitness functions (figures of merit), but the soundness of these approaches has yet to be tested by experimental verification of de novo-designed catalysts. Here, a previously developed criterion for the optimization of dative ligands L in ruthenium-based olefin metathesis catalysts RuCl2(L)(L')(═CHAr), where Ar is an aryl group and L' is a phosphine ligand dissociating to activate the catalyst, was used in de novo design experiments. These experiments predicted catalysts bearing an N-heterocyclic carbene (L = 9) substituted by two N-bound mesityls and two tert-butyl groups at the imidazolidin-2-ylidene backbone to be promising. Whereas the phosphine-stabilized precursor assumed by the prediction model could not be made, a pyridine-stabilized ruthenium alkylidene complex (17) bearing carbene 9 was less active than a known leading pyridine-stabilized Grubbs-type catalyst (18, L = H2IMes). A density functional theory-based analysis showed that the unsubstituted metallacyclobutane (MCB) intermediate generated in the presence of ethylene is the likely resting state of both 17 and 18. Whereas the design criterion via its correlation between the stability of the MCB and the rate-determining barrier indeed seeks to stabilize the MCB, it relies on RuCl2(L)(L')(═CH2) adducts as resting states. The change in resting state explains the discrepancy between the prediction and the actual performance of catalyst 17. To avoid such discrepancies and better address the multifaceted challenges of predicting catalytic performance, future de novo catalyst design studies should explore and test design criteria incorporating information from more than a single relative energy or intermediate.

Extending the substrate scope of palladium-catalyzed arylfluorination of allylic amine derivatives

Fluorinated molecules often show superior bioactivity or ADME (absorption, distribution, metabolism, and excretion) properties compared to their non-fluorinated analogues. In fact, 20–30 % of newly approved drugs and the majority of recently approved agrochemicals are organofluorine compounds. Unsurprisingly, there is great interest in the development of new and/or improved processes for fluorine incorporation. Pd-catalyzed arylfluorination of alkenes is a novel, emerging fluorination method, which simultaneously introduces a fluorine atom and an aryl group into an alkene framework. The aim of the current work was studying, improving, and extending a literature arylfluorination protocol, which originally utilized N-allylated sulfonamide substrates.

Phenolylazoindole scaffold for facilely synthesized and bis-functional photoswitches combining controllable fluorescence and antifungal properties using theoretical methods.

Functionalization is a major challenge for the application of photoswitches. With the aim to develop novel bis-functional azo photoswitches with stationary photophysical properties, a series of phenolylazoindole derivatives were designed, synthesized, and characterized via NMR spectroscopy studies and high-resolution mass spectrometry (HRMS). Herein, UV/Vis and 1H NMR spectra revealed that the photostationary state (PSS) proportions for PSScis and PSStrans were 76-80% and 68-81%, respectively. Furthermore, the thermal half-lives (t1/2) of compounds A2-A4 and B2 ranged from 0.9 to 5.3 h, affected by the diverse substituents at the R1 and R2 positions. The results indicated that azo photoswitches based on the phenolylazoindole scaffold had stationary photophysical properties and wouldn't be excessively affected by modifying the functional groups. Compounds A4 and B2, which were modified with an aryl group, also exhibited fluorescence emission properties (the quantum yields of A4 and B2 were 2.32% and 13.34%) through the modification of the flexible conjugated structure (benzene) at the R2 position. Significantly, compound C1 was obtained via modification with a pharmacophore in order to acquire antifungal activities against three plant fungi, Rhizoctonia solani (R. solani), Botrytis cinerea (B. cinerea), and Fusarium graminearum (F. graminearum). Strikingly, the inhibitory activity of the cis-isomer of compound C1towards R. solani (53.3%) was significantly better than that of the trans-isomer (34.2%) at 50 μg mL-1. In order to further reveal the antifungal mechanism, molecular docking simulations demonstrated that compound C1 effectively integrates into the cavity of succinate dehydrogenase (SDH); the optically controlled cis-isomer showed a lower binding energy with SDH than that of the trans-isomer. This research confirmed that phenolylazoindole photoswitches can be appropriately applied as molecular regulatory devices and functional photoswitch molecules via bis-functionalization.

Formation and reactivity of a unique M⋯C-H interaction stabilized by carborane cages.

Broadening carborane applications has consistently been the goal of chemists in this field. Herein, compared to alkyl or aryl groups, a carborane cage demonstrates an advantage in stabilizing a unique bonding interaction: M⋯C-H interaction. Experimental results and theoretical calculations have revealed the characteristic of this two-center, two-electron bonding interaction, in which the carbon atom in the arene ring provides two electrons to the metal center. The reduced aromaticity of the benzene moiety, long distance between the metal and carbon atom in arene, and the upfield shift of the signal of M⋯C-H in the nuclear magnetic resonance spectrum distinguished this interaction from metal⋯C π interaction and metal-C(H) σ bonds. Control experiments demonstrate the unique electronic effects of carborane in stabilizing the M⋯C-H bonding interaction in organometallic chemistry. Furthermore, the M⋯C-H interaction can convert into C-H bond metallization under acidic conditions or via treatment with t-butyl isocyanide. These findings deepen our understanding regarding the interactions between metal centers and carbon atoms and provide new opportunities for the use of carboranes.