Abstract
We present a novel ultrasonic wire-to-wire bonding method for bonding two micrometer-thick metal wires together. A special jig and an industrial wire bonder perform the bonding. This wire-to-wire bonding is the core unit process to produce space tether for the Electric Solar Wind Sail. The proposed method was validated experimentally with 38 bonds where a 25 μm and a 50 μm by diameter Al wires that were first bonded together after which the bond was pull tested. The measured average pull force was (74 ± 15) mN whereas the lowest pull force value was 40 mN. The results show that wire-to-wire bonds of sufficient strength can be produced for the Electric Solar Wind Sail tether application. Tether manufacturing was demonstrated with a separate test where a 1.4 m long tether was produced featuring more than 100 wire-to-wire bonds.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.