Abstract
Purpose This study aims to reduce the warping deformation of the stainless composite plate after removal strake by using a finite element method. A three-dimensional thermo-mechanical coupled elastic-plastic finite element model has been suggested by using ABAQUS to simulate the multi-pass hot rolling of stainless composite plate. Design/methodology/approach A three-dimensional thermo-mechanical coupled elastic-plastic finite element model has been suggested by using ABAQUS to simulate the multi-pass hot rolling of stainless composite plate. Warping deformation rules of 316L/Q345R stainless composite plate after removal strake have been analyzed. Moreover, the influences of some different rolling parameters on this deformation have been discussed. Findings The warping deformation just varies in the range of cladding ratio from 0.1 to 0.25. Therefore, cladding ratio does not have a great influence on warping deformation. Originality/value The results show that higher heating temperature, larger final thickness and less rolling passes are beneficial for reducing the warping deformation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
