Abstract
This article introduced the double-bag air cushion method (DBACM) as an economical and efficient manufacturing process of polymer composites associated with the vacuum-assisted resin transfer molding (VARTM) process. The method utilizes an improved double-bag along with several air cushions to create distribution channels for enhancing the resin flow during infusion. Experimental evaluation on resin infusion behavior and mechanical properties, including ultimate strength, void content, surface finish, and thickness uniformity, is performed for composites reinforced with both jute fibers and glass fibers. Results showed that the DBACM reduces the infusion time by more than 26.0% as compared with traditional VARTM. The difference in ultimate strength of the part between the DBACM and the VARTM is about 2.9%–3.9%. The void content of the E-glass composites is 1.3%–1.5% due to the few fissure-like microvoids, whereas the void content of the jute composites is high, about 2.4%–4.0%, because of the sparse spherical macrovoids. Additionally, there are no major differences in surface finish and thickness uniformity between the parts fabricated by DBACM and by conventional VARTM.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Transactions of the Canadian Society for Mechanical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.