Abstract

Glass fiber reinforced composites are finding various applications due to their high specific stiffness/strength, and corrosion resistance. Vacuum assisted resin transfer molding (VARTM) is one of the commonly used low cost composite manufacturing processes. Polyurethane (PU) resin system has been observed to have better mechanical properties and higher impact strength when compared to conventional resin systems such as polyester and vinyl ester. Until recently, PU could not be used in composite manufacturing processes such as VARTM due to its low pot life. In the present work, a thermoset PU resin systems with longer pot life developed by Bayer MaterialScience is used. Glass fiber reinforced PU composites have been manufactured using one part PU resin system. Performance evaluation was conducted on these composites using tensile, flexure and impact tests. Finite element simulation was conducted to validate the mechanical tests. Results showed that PU composites manufactured using novel thermoset PU resins and VARTM process will have significant applications in infrastructure and automotive industries.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.