Abstract
Using a hetero-epitaxial lateral overgrowth (ELO) technology with low-temperature deposited AlN interlayer, high-quality crack-free Al 0.22 Ga 0.78 N with low dislocation density is realized. The dislocation density in the Al 0.22 Ga 0.78 N was reduced to as low as the order of 10 7 cm -2 over the whole wafer. Applying the high-quality AlGaN layer to a UV light-emitting diode (LED), high output power of more than 0.1 mW at a forward current of 50 mA has been demonstrated with the emission peak wavelengths from 323 to 352 nm. The highest output power of 0.6 mW is obtained for the 352 nm LED with GaN/AlGaN multiple quantum well active layer. The emission efficiency was dependent on the wavelength, and the 323 nm LED has the lowest output power of 0.18 mW at 50 mA bias. One of the factors determining the external quantum efficiency is thought to be an inferior hole spread in highly resistive p-type layers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
