Abstract

Coarse aggregate used as part of cement concrete is of primary significance for the obtained parameters of hardened concrete. In case of concretes intended for airfield pavements, the application of granite grit is recommended. Alternative to this type of aggregate in the form of porphyry and amphibolites aggregate was suggested. In order to assess the suitability of different aggregate types for concrete mixes, their bulk density, absorbability, polishing resistance, abrasion and crushing resistance were determined. Also, the internal structure of the suggested aggregates and its influence on changes of hardened concrete composite structure were subject to the assessment. The influence of aggregate type on the structure of cement matrix and contact areas between the matrix and aggregate grains were specified. The observed changes, in case of the internal structure of concretes based on porphyry and amphibolites aggregates, with reference to granite aggregate, resulted in changes of mechanical and physical parameters. Analyses included the determination of bulk density, absorbability, compression, bending and splitting resistance. According to the obtained laboratory test results, the significant influence of the aggregate type applied to the mix on parameters of hardened concrete, with regard to the application thereof to the airfield pavements was proved.

Highlights

  • The article is aimed at the assessment of the suitability of the suggested aggregates in the composition of cement concrete intended for airfield pavements

  • The basic properties of granite, porphyry and amphibolites aggregate were determined. It was assessed whether the applied aggregate influences the change of parameters of internal structure of hardened cement concrete, the change of physical and mechanical properties of concrete intended for air field pavements

  • According to the conducted tests in case of the analyzed aggregate types it was proved that amphibolites aggregate is distinguished by the greatest volume density and porphyry aggregate by the lowest volume density

Read more

Summary

Introduction

The article is aimed at the assessment of the suitability of the suggested aggregates in the composition of cement concrete intended for airfield pavements. The basic properties of granite, porphyry and amphibolites aggregate were determined. It was assessed whether the applied aggregate influences the change of parameters of internal structure of hardened cement concrete, the change of physical and mechanical properties of concrete intended for air field pavements

Materials
Characteristics of aggregates
Methodology and test results
Assessment of parameters of the analyzed aggregates
Assessment of influence of aggregate type on concrete microsructure
Conclusions
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.