Abstract
Cyclohexanone is largely generated in the direct or indirect conversion of lignin-derived bio-oils. Hence, the upgrading of cyclohexanone, i.e. deoxygenation in the presence of hydrogen is of great interest. In this regard, two nickel-molybdenum catalysts on alumina support were investigated in the temperatures up to 400 °C and pressures up to 15 bar. High activity, selectivity, and yield were achieved by utilizing these catalysts at the studied condition. The main products of the upgrading of cyclohexanone were C6, C7, and C12 cyclic, aromatic, and bicyclic including cyclohexane, cyclohexene, benzene, and cyclohexylbenzene. The results of the present study imply that these catalysts are beneficial in producing hydrocarbon-rich products from cyclohexanone and lignin-derived bio-oils. Based on the achievements of the present study, the nickel-molybdenum catalyst composed of 1.14 wt% nickel and 14.27 wt% molybdenum showed about 87%, 100%, and 116% conversion of cyclohexanone, total hydrocarbon selectivity, and total hydrocarbon yield, respectively. The optimum condition for obtaining such results was at 400 °C and 8 bar.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call