Abstract

Ground granulated blast-furnace slag (GGBS) is widely used as supplementary cementitious material of interest for adjusting the performance of concrete. Unlike standard commercial products, characteristics of GGBS from different iron manufacturers vary significantly and assessment of its reactivity, especially at an early age, is not well-established despite numerous parameters specified in current standard systems. Three GGBSs with different setting features during the alkali-activated process were dissolved in either deionised (DI) water or NaOH solution in this study. To illustrate the fundamental processes of reaction kinetic, the dissolved ion concentrations, glassy structural changes, and chemically bound water were measured using ICP-OES, FTIR, and TG respectively. Meanwhile, thermodynamic calculations were carried out to estimate the precipitation of C–S–H gels, which is directly linked with setting behaviours. The results clearly show the differences in the dissolution of the three GGBSs, which could be used to indicate the activity of GGBS. The GGBS with higher activity (i.e. faster setting during alkali activation) tends to dissolve evenly in DI water, whilst those with lower activity show that the silicate groups with lower polymerisation dissolved faster. The chemically bound water determined by TG analysis and the effective saturation index (ESI) are promising parameters for reflecting the activity of GGBS during dissolution in the alkali media. Although this study demonstrated the dissolution rate of higher polymerised silicate groups in GGBS should be the root for the differences in its activity, more structural information on the glassy phase and the interactions of alkali with the surface of GGBS still require further understanding. It is speculated that the ratio of Al[IV]/Al[V] plays an important role in the activity of GGBS. This finding may shape a certain basic understanding of how GGBSs dissolve in neutral and high pH solutions and highlight a re-evaluation of assumptions in thermodynamic simulation under different conditions.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call