Abstract
Photocatalytic TiO2 layers were deposited by anodic oxidation on high purity titanium substrates followed by ultraviolet light A (UVA) irradiation in solutions of varying pH (1, 4, 7, and 11) for 12 h. Afterwards, the UVA-treated anodised titanium foils were soaked in simulated body fluid (SBF) for 7 days. The morphological, mineralogical, surface wettability, and in vitro synthesis of the anodised samples were determined. The work showed that the surface morphology and crystallinity of the anodised coating was unchanged after UVA treatment in solutions of varying pH. However, the water contact angle decreased remarkably after UVA treatment, with the sample irradiated in a solution of pH 1 showing the lowest angle (31.8°). After soaking in SBF and with UVA irradiation for 7 days, highly crystallised bone-like apatite layer fully covered the surfaces of the anodised samples. Cross-sectional images revealed that the optimal condition for UVA treatment was at pH 1 (acidic) since it resulted in the thickest layer (2.8 μm) of bone-like apatite formation after soaking in SBF. The results clearly showed that UVA irradiation assisted the growth of bone-like apatite layer on anodised surfaces.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.