Abstract
A high-k gate stack structure with ultrathin HfON/SiO2 as dual tunneling layer (DTL), AlN as charge storage layer (CSL) and HfAlO as blocking layer (BL) is proposed to make a charge-trapping-type metal–oxide–nitride–oxide–silicon non-volatile memory device by employing in-situ sputtering method. The validity of the structure is examined and confirmed by transmission electron microscopy. The memory window, program/erase, endurance and retention properties are investigated and compared with similar gate stack structure with Si3N4/SiO2 as DTL, HfO2 as CSL and Al2O3 as BL. Results show that a large memory window of 3.55V at a program/erase (P/E) voltage of +8V/−15V, high P/E speed, and good endurance and retention characteristic can be achieved using the Au/ HfAlO/AlN/(HfON/SiO2)/Si gate stack structure. The main mechanisms lie in the enhanced electron injection through the ultrathin high-k HfON/SiO2 DTL with suitable band offset, high trapping efficiency of the high-k AlN material, and effective blocking role of the high-k HfAlO BL.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.