Abstract
PurposeThe purpose of this paper is to prepare water‐soluble TiO2 nanoparticles and evaluate the tribological properties as additives in water.Design/methodology/approachNanoparticles present excellent friction‐reducing and antiwear properties as additives in base oils. However, there are seldom literatures about the nanoparticles as additives in water as yet. In this work, water‐soluble TiO2 nanoparticles were prepared by sol‐gel method and characterized with transmission electron microscopy and selected area electron diffraction. The tribological properties as additives in water were investigated by SRV and the surface analysis by scanning electron microscope and X‐ray photon electron spectroscope.FindingsTiO2 nanoparticles modified with polyethylene glycol have uniform size about 10 nm and easily dissolve in water. The tribological experiments showed TiO2 nanoparticles exhibit excellent friction‐reducing and antiwear properties.Research limitations/implicationsThe paper is restricted to only TiO2 nanoparticles. Some other water‐soluble nanoparticles also should be prepared and their tribological properties investigated.Practical implicationsWater‐soluble TiO2 nanoparticles could be used as water additives and improve the tribological properties.Originality/valueThis paper emphasises that the water‐soluble nanoparticles are prepared and could be used as water additives.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.