Abstract
AbstractWe report the first in situ XPS analysis of thin epitaxial films of the ferromagnetic double perovskite Sr2FeMoO6, which have been prepared by pulsed laser deposition on (100) SrTiO3 substrates under different oxygen pressures. The films consist mainly of the c‐axis‐oriented SFMO phase over a wide range of oxygen pressure (10−8–10−4 mbar) as determined by ex situ x‐ray diffraction measurements. However, different secondary phases are observed, depending on the preparation conditions. When obtained in ultrahigh vacuum conditions (10−8 mbar) the films show the presence of metallic Fe, whereas when prepared under pure oxygen gas flow (pressures above 10−6 mbar ) the Fe3O4 phase is observed. The in situ XPS analysis suggests the formation of the SrFeO3 phase in addition to SFMO, whereas the SrMoO4 phase is formed at oxygen pressures above 10−4 mbar. Copyright © 2002 John Wiley & Sons, Ltd.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.