Abstract
Abstract The effect of graphene on the corrosion inhibition properties of a hybrid epoxy–ester–siloxane–urea polymer was investigated. The weight fraction of graphene was varied from 1 to 2 wt%. Direct current polarization (DCP) and electrochemical impedance spectroscopic (EIS) techniques were used to measure the polarization and coating resistance of the coated aluminum alloy substrate. The grapheme/hybrid polymer composite coatings showed much higher corrosion inhibition property when compared to the neat hybrid polymer coating. An increase in glass transition temperature and rubbery region modulus was also observed for composites containing 1–2 wt.% of graphene. A direct correlation between the rubbery plateau modulus of free standing composite thin films and corrosion resistance of the composite coatings was made, indicating that the corrosion protection mechanism is due to restriction of the polymer chain motion by graphene which causes a decrease in coating permeability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have