Theoretical and experimental research on the mechanical tests of 3D printed samples from various materials

Abstract

At this moment, a real industrial, scientific and technological revolution is being discussed worldwide, consisting in the development of Additive Manufacturing AM technologies through the use of 3D printing. The FDM (Fused Deposition Modelling) 3D printing technology consists in the deposition of fusible material layer by layer in the XOY plane, the thickness of the 3D printed layer is g = 0.12 ÷ 0.24 mm, the resolution of 3D printing is r = 0.1mm, while the print head advances vertically on the OZ axis. The purpose of the work is to determine the breaking moment through destructive mechanical bending tests of some samples made by 3D printing from the following materials: ABS+, PETG and PLA. 5 samples were made in 3 printing directions: horizontal, vertical and lateral, resulting in 15 samples for each material. The total number of samples used is 45. Knowing these values, depending on the requirements of the specifications, a certain material and a certain printing position can be used.