Abstract
Increasing of the accuracy of measuring of volumetric flow and volume on hydroeconomic and irrigation systems is urgent today. It can be implemented by further development of the theoretical basis for determining the flow using flumes, given the actual conditions of operation. Analyzed the generalized algorithm for calculating discharge characteristics of flumes with different spatial configurations, based on the theory of critical depth. Clarifying of discharge and velocity coefficients, which functionally depend on the gauge in the approach part of flume and determined by successive iterative operations, was made. The results of clarifying stage-discharge relationship of Venturi-flume is given. The comparison and analysis of the discharge characteristics standardized Venturi-flume, obtained using a generalized flow depending on the head, and iterative method for clarified discharge and velocity coefficients, is conducted.
Highlights
Increasing of the accuracy of measuring of volumetric flow and volume on hydroeconomic and irrigation systems is urgent today. It can be implemented by further development of the theoretical basis for determining the flow using flumes, given the actual conditions of operation
Clarifying of discharge and velocity coefficients, which functionally depend on the gauge in the approach part of flume and determined by successive iterative operations, was made
The comparison and analysis of the discharge characteristics standardized Venturiflume, obtained using a generalized flow depending on the head, and iterative method for clarified discharge and velocity coefficients, is conducted
Summary
Узагальнюючи рівняння (4), з метою його застосування для лотків різної форми поперечного перетину вводяться додаткові коефіцієнти і воно набуває виду де СD – коефіцієнт витрати, що враховує властивості потоку, відмінні від ідеальних умов, а також частково ефект примежового шару у звуженій частині лотка; CS – коефіцієнт форми, що враховує ефект потоку із формою поперечного перетину, відмінною від прямокутної; Cv – коефіцієнт швидкості, що пов’язує рівень заповнення лотка у підвідній частині h (напір рідини над дном лотка ) із загальним напором H, b – ширина лотка у підвідній частині (рис.2). Уточнення витрато-напірної характеристики Аналіз виразів (6)-(8) вказує на те, що коефіцієнти витікання, форми та швидкості функціоно залежать від рівня заповнення лотка.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Mechanical Engineering the National Technical University of Ukraine "Kyiv Polytechnic Institute"
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.