Abstract
The present paper deals with different effects of homogenization time and cooling environment on Ni-42.5wt%Ti-7.5wt%Cu alloy. The alloy was prepared by vacuum arc melting. Afterwards, three homogenization times (half, one and two hour) and three cooling environments (water, air and furnace) at 1373 K were selected. Optical and Scanning Electron Microscopic methods, EDX, DSC and hardness tests have been used to evaluate the microstructure, transformation temperatures and hardness. Results indicate that specimens that were cooled in air are super-saturated. Also, the microstructure from furnace cooling has many disparities with the other cooling environments’ microstructure and two types of precipitates exhibit in the matrix, but in other cooling environments, only one phase can be seen. Particles of the Ti2(Ni,Cu) phase are distributed in the matrix in all of the microstructures irrespective of cooling rate. Observations show that increasing the time of homogenization results in finer precipitates and uniform distribution in the matrix. In addition, alteration of cooling rate and time of homogenization affect the martensitic transformation temperatures. On the other hand, the hardness varies slightly for different homogenization times but declines extremely with decreasing cooling rate. Moreover homogenization time and the cooling environment affect the transformation temperatures on furnace cooled samples.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
