Abstract
This study aims to analyze the effect of the root gap on bending test of SS 400 steel materials with different thicknesses of 10 mm and 12 mm using FCAW (Flux Core Arc Welding) welding in the 3G Vertical up position without backing ceramic. This study uses quantitative method, and the standard used in the test is ASME section IX (2019). The results of the study concluded that in specimens within the thickness of 10 mm, the highest value was obtained at the root gap variation of 4.4 mm with a bending stress value of: 467.48 MPa. Then on the specimen with a thickness of 12 mm, the highest value was found in a variation of 3 mm with a bending stress value of: 805.37 MPa
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Applied Sciences, Management and Engineering Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
