Abstract
ABSTRACTThis paper reports the ozone generation in pulsed multichannel dielectric barrier discharge. The influence of nitrogen addition (0.1%–10%) on ozone concentration and ozone generation efficiency in nitrogen–oxygen gas mixtures is studied. Results show that adding 0.1% N2 would not seriously increase the ozone production. Meanwhile, 1% N2 content exhibits the highest ozone production efficiency in low SIE (J/L, defined as the ratio of power to gas flow rate) region (0–200 J/L) while adding 0.3% N2 would lead to the highest ozone generation efficiency in high SIE region (300–800 J/L). The increase of ozone production induced by N2 addition is more significant in low SIE region compared with that in high SIE region. At 100 J/L, ozone production efficiency increases 26.9% to 201.6 g/kWh with 1% N2 addition when compared with that in oxygen. At 18 J/L, the observed maximum ozone generation efficiency reaches 252 g/kWh at 1.3 g/Nm3 with 1% N2 addition. An increase of ozone production can be obtained with 0.3%–2% N2 addition in all explored SIE ranges.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.