Abstract
Materials with superior cryogenic strength and good ductility are increasingly in demand for resident friendly liquid-hydrogen (20K) storage tanks. Additionally, the space industry also requires materials that retain excellent mechanical properties at extremely low temperatures. However, mechanical testing at such low temperatures is highly limited due to the difficulties in achieving and maintaining such conditions, while also providing adequate thermal insulation to prevent heat transfer from the surrounding environment. In this study, we present a novel tensile testing technique for a Fe-15Mn-13Cr-3Si-3Ni-0.1C (wt.%) steel at the temperature of liquid helium. To minimize the use of expensive liquid helium, we adopted a method of injecting liquid helium vapor and set the temperature for tensile testing at 6 K. The present alloy has a single face-centered cubic (FCC) structure with a large amount of stacking faults after annealing treatment. The Fe-Mn-Cr steel exhibited a superior ultimate tensile strength of 1200 MPa and good ductility of 35% at 6K. Moreover, compared with room temperature tensile tests, discontinuous plastic flow, i.e. serrated flow, occurred at extremely low temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
