Temperature‐dependent inter‐laminar fracture behavior of waste short carbon fiber embedded glass fiber/epoxy composites

Abstract

AbstractDelamination is one of the life‐limiting failure modes for fiber reinforced polymer (FRP) composite composites resulting in poor damage tolerance, as this failure mode occurs at considerably lower loads. Owing to the enormous demand and mass production of FRP composites, a large amount of fiber waste is produced worldwide. This triggers concern about utilizing these fiber wastes for some valuable applications. The present study aims to improve the overall damage tolerance of laminated glass/epoxy composites via the introduction of waste short carbon fibers (SCFs) reinforcement in the epoxy matrix. The effect of various SCF contents (0.1, 0.3, and 0.5 wt%) in glass fiber/epoxy composites were evaluated experimentally for their interlaminar fracture toughness in terms of both crack development and propagation under mode I and II interlaminar fracture toughness tests, at elevated temperatures (30, 50, and 70°C). Based on the experimental results, glass/epoxy composite with 0.1 wt% of SCF revealed 13.49% and 20.45% increment in mode I and II interlaminar fracture toughness, respectively, at ambient temperature. A positive reinforcement effect could be noticed for GIC and GIIC values up to 50°C. However, due to residual interfacial stresses, interfacial debonding, and epoxy softening, a negative reinforcement effect could be noticed at 70°C. Delamination initiation and crack propagation mechanisms have been explored at elevated temperatures. Fractographic studies have been carried out using a scanning electron microscope to identify the failure mechanisms.