Abstract
Purpose: To investigate the accuracy of a Monte Carlo dose calculation engine for IMRT using a Novalis Tx LINAC with the HD‐120 MLC. Methods: PDD and beam profiles ranging from 1×1 to 20×20 cm2 were calculated and compared against measured data in water to commission the LINAC built on the BEAMNRC platform. An in‐house, MATLAB‐based software was used to extract the parameters needed for the MC simulation from the DICOM‐RT plan and create input files for the MCSim egs4 Monte Carlo code. MCSim egs4 software was used to simulate the IMRT treatment plans in a cylindrical solid‐water phantom and ultimately used to compute the dose. In‐house software using a MATLAB platform was utilized to convert the 3D dose file obtained from the Monte Carlo simulation to a universal file which can be read on the RIT Software platform. Within RIT, the MC and treatment planning system (TPS) dose calculations could be compared. Results: 5 IMRT plan simulations were performed and good agreement results were achieved for TPS and MC dose comparison. Gamma analysis with a 3% dose and 3 mm DTA criteria shows a mean gamma index value of 92% for the cases studied. Conclusions: Based on our preliminary results, the Monte Carlo based Novalis Tx linear accelerator and the MCSim simulations of the IMRT treatments on a cylindrical phantom demonstrate good accuracy with regards to the treatment planning dose calculation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
