Abstract
In this paper we studied a simultaneous extraction process of As, Cd, Cr and Pb in waters by solid phase extraction technique followedby graphite furnace atomic absorption spectrometry. Accordingly, As(V) was reduced to As(III) in 0.5 % sodium thiosulfate prior to form Me-PDC complex with ammonium pyrrolidinedithiocarbamate (APDC). The complexation reactions were optimized at pH 4.0 for As(III), Cd, Pb and at pH 4.7 for Cr(III), Cr(VI). The non-polar MePDC complexes were retained on SPEC18 cartridge. This method may help to eliminate matrix interferences as well as topreconcentrate the analytes at the factor of up to 20 times. Parameters influence upon the extraction procedure and analysis were also investigated. Detection limits of method was 0.328,0.011, 0.080 and 0.109 µg/L for As, Cd, Cr and Pb, respectively. The method has been successfully applied to the determination of these metal ions in brackish water and sea water collected at Tien Giang province.
Highlights
In this paper we studied a simultaneous extraction process of As, Cd, Cr and Pb in waters by solid phase extraction technique followedby graphite furnace atomic absorption spectrometry
The complexation reactions were optimized at pH 4.0 for As(III), Cd, Pb and at pH 4.7 for Cr(III), Cr(VI)
The non-polar MePDC complexes were retained on SPE
Summary
Trong bài báo này chúng tôi trình bày phương pháp chiết đồng thời các ion kim loại nặng As, Cd, Cr và Pb trong mẫu nước nhiễm mặn bằng kỹ thuật chiết pha rắn kết hợp với việc phân tích bằng phổ hấp thu nguyên tử - nguyên tử hóa bằng lò graphite. Phản ứng giữa các ion As(III),Cd, Pb với APDC xảy ra tốt ở pH 4,0 và pH 4,7 tối ưu cho phản ứng của Cr(III)/Cr(VI). Ngoài lợi ích loại bỏ nền muối, kỹ thuật chiết pha rắn còn giúp làm giàu chất phân tích đến 20 lần. Quy trình đã được áp dụng thành công trên nền nước nhiễm mặn và nước biển được thu thập ở tỉnh Tiền Giang. Từ khoá: Arsen, Cadmium, Chromium, Chì ; GF-AAS, chiết pha rắn, APDC, nước nhiễm mặn
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have