Study on the synthetic mechanism of monodispersed polystyrene-nickel composite microspheres and its application in facile synthesis of epoxy resin-based anisotropic conductive adhesives

Abstract

Monodispersed polystyrene-nickel (PS-Ni) composite microspheres were used to enhance the conductivity of epoxy-based anisotropic conductive adhesive (ACA) for the first time. Specifically designed PS-Ni composite microspheres were used as conductive elements to construct anisotropic conductive arrays. The surface microstructure and morphology of the prepared PS-Ni composite microspheres were tuned by controlling the implementation method of electroless plating and concentration of Ni precursor. The structural composition, thermal properties, and electrical properties of PS-Ni composite microspheres were analyzed. In addition, diglycidyl ether of bisphenol-A (DGEBA) epoxy resin and low molecular weight polyamide resin were used as the matrix resin and curing agent, respectively. The optimal process parameters were employed and predicted based on the curing kinetics. A simple strategy was developed for the preparation of anisotropic conductive binders (viz. PS-Ni/EP-ACAs) via physical doping by addition of terminal carboxyl-terminated butadiene acrylonitrile (CTBN) copolymer and additives. PS-Ni/EP-ACAs exhibited satisfactory anisotropic electrical properties in fabricated components due to submicron structures composed of PS-Ni composite microspheres with excellent integrated properties in the anisotropic conducting array. Therefore, the theoretical concept and fabrication mean proposed in this study showed great potential and practical application in large-scale ACAs preparation.