Abstract
Erosion-enhanced corrosion behaviour of X-65 carbon steel and UNS S32750 superduplex stainless steel was investigated by electrochemical cyclic polarisation. The tests were performed using a jet slurry device coupled with a potentio-galvanostat at various jet velocities of 4, 6.5 and 9 m s−1 and impingement angles of 30 and 90˚ in a 3.5 wt-% NaCl water containing 6 wt-% silica sand particles. The results showed that increasing the jet velocity and impingement angle increased the corrosion rate of both alloys. Negative hysteresis and greater Erp than OCP were observed for superduplex stainless steel in all erosion–corrosion conditions that indicated the pitting resistance of the alloy. However, the low resistance of carbon steel against pitting during erosion–corrosion was demonstrated by positive hysteresis in the cyclic polarisation curves as well as SEM images of the eroded surfaces.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
