Abstract

Thin layers of nanocrystalline FeSi 2 embedded in Si structures have been formed by Fe implantation using a metal vapor vacuum arc (MEVVA) ion source under various implantation and thermal annealing conditions. The microstructures were studied in details and correlated with the photoluminescence (PL) properties. It is found that higher lattice coherence between the FeSi 2 nanocrystals and the Si matrix is associated with better light emission efficiency. Multiple-cycle implantation schemes were introduced and it is shown that with appropriate process design the dose quenching effect can be suppressed to achieve light emission enhancement in higher dose samples. De-convolution of the PL spectra into two or three peaks was performed and their temperature and excitation power dependence were analyzed. The analysis results indicate that the 1.55-μm emission really originated from FeSi 2 and that the emission peaks are likely donor- or accepted-level-related. MOS structures with the incorporation of implanted nanocrystalline FeSi 2 were fabricated. Electroluminescence (EL) spectra from these devices showed two peak features of which one peak corresponds to FeSi 2 emission and the other corresponds to enhanced Si band-edge emission. Clear room-temperature EL signals from these device structures were observed. A model is proposed to qualitatively understand the temperature dependence of the EL spectra.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call