Strength design of built-up radially battened columns subject to axial compression and arbitrary directional bending moment

Abstract

Built-up radially battened columns (RBCs), comprising several identical circular steel tubes interconnected by multiple radial-shaped battens, represent an innovative column design that combines aesthetic appeal with exceptional load-bearing capacity. This makes them well-suited for architectural applications in large public buildings such as stations and airports. The axial compressive strength design methods for the built-up RBC have been extensively explored in the authors' prior studies. However, in real-world engineering applications, built-up RBCs may experience simultaneous axial compression and varying directional bending moments, particularly when considering potential eccentric compression or wind and earthquake loads in public buildings. Currently, strength design methods for this loading condition are still lacking. To address this deficiency, this paper primarily delves into the failure mechanism and strength design methods for built-up RBCs experiencing combined axial compression and arbitrary directional bending moments. Initially, the sectional strength of the built-up RBC is investigated by using a shell finite element model (FEM) for the built-up RBC. It is revealed that the compression-bending sectional strength of the built-up RBC exhibits significant differences with varying bending directions and tube numbers. Moreover, in some bending directions, the M-N sectional strength curve of the built-up RBC exhibits convexity. By integrating theoretically derived equations grounded in the principles of materials mechanics with FEM numerical calculations, concise and practical design equations are proposed for accurately predicting the sectional strength of the built-up RBC under combined axial compression and arbitrary directional bending moments. Subsequently, The buckling strength of the built-up RBC is studied using the FEM, considering initial geometrical imperfections consistent with first-order flexural buckling and accounting for geometric nonlinearity. It is noted that the bending direction of the built-up RBC may deviate during loading. Besides, the M-N buckling strength curve of the built-up RBC is not as convex as its M-N sectional strength curve. Based on calculations from numerous examples, practical design equations for predicting the buckling strength for the built-up RBC under axial compression and any directional bending moments are introduced. The key findings of this paper contribute to the compression-bending strength design of RBCs, enriching RBC design theory and promoting the widespread application of built-up RBCs in actual engineering projects.