Abstract
In this article, a method of single-event burnout (SEB) hardening at high linear energy transfer (LET) value range is proposed and investigated by the 2-D numerical simulations. The improved MOSFET using this method and the conventional MOSFET are analyzed and compared to evaluate the effectiveness of this method. Simulation results show that, compared with the conventional MOSFET, the improved MOSFET using this method can effectively and quickly reduce the internal high electric field, thereby reducing the temperature. Under the condition of a LET value of 0.5 pC/ $\mu \text{m}$ and a drain voltage of 1200 V, the maximum drain current is 0.168 A, and the maximum global device temperature is 1724 K, which is much lower than the melting down temperature of silicon carbide (SiC) (3100 K). The hardening method in this article can be applied to different breakdown voltages by adjusting structure parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.