Abstract
Shock compression and spallation of a low-cost cobalt-free medium-entropy alloy (MEA), Fe40Mn20Cr20Ni20 (at%), with a face-centered-cubic structure are investigated via plate impact experiments, to reveal its dynamic mechanical properties and corresponding microscopic deformation/damage mechanisms. The Hugoniot equation of state, yield strength, spall strength and pullback rate are obtained from free-surface velocity histories. Post-deformation samples are characterized with transmission electron microscopy, scanning electron microscopy and electron backscatter diffraction. The Fe40Mn20Cr20Ni20 MEA exhibits a good balance in spall strength and ductility (low pullback rate) at a relatively low cost, compared to several other types of medium/high entropy alloys and steels. At sufficiently high impact velocity (e.g., 500 ms−1 here), nanoscale deformation twinning becomes a key deformation mechanism for Fe40Mn20Cr20Ni20 MEA in addition to dislocation slip. During spallation, voids (i.e., damage) nucleate preferentially at grain boundary triple junctions, and grow isotropically with increasing loading. Owing to fine grains and strong plastic deformation capability of the Fe40Mn20Cr20Ni20 MEA, void coalescence is accomplished by intragranular shear deformation bands and cracks, which contributes to its high ductility.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
