Abstract
The second-order non-linear susceptibility components were measured using 1.064 μm incident light for ZnO thin films of various thicknesses from 24.4 to 283 nm self-assembled on sapphire substrates by laser molecular beam epitaxy. It was found that the values of the non-linear susceptibility for the films are almost the same as those of bulk material, except the samples with thicknesses ranging from 35 to 64.8 nm, which show a large enhancement effect. For the sample with a thickness of 44.4 nm, the second-order non-linear susceptibility components were found to be approximately 14.7 pm/v for d 31, 15.2 pm/v for d 15, and −83.7 pm/v, a value approximately 14 times that of the bulk material, for d 33. The second-order non-linear coefficient enhancement in the thin films may be resulted from the microcrystallite structures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.