Abstract
GeSn alloys hold great promise as high-performance, low-cost, near- and short-wavelength infrared photodetectors with the potential to replace the relatively expensive and currently market-dominant InGaAs- and InSb-based photodetectors. In this Letter, we demonstrate room-temperature GeSn pn photodetectors fabricated by a complementary metal-oxide-semiconductor compatible process, involving Sn and P ion implantation and flash-lamp annealing prior to device fabrication. The fabrication process enables the alloying of Ge with Sn at concentrations up to 4.5% while maintaining the high-quality single-crystalline structure of the material. This allows us to create Ge0.955Sn0.045 pn photodetectors with a low dark current density of 12.8 mA/cm2 and a relatively high extended responsivity of 0.56 A/W at 1.71 μm. These results pave the way for the implementation of a cost-effective, scalable, and CMOS-compatible short-wavelength infrared detector technology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.