Rock fracture propagation in a damage zone by a constitutive model coupling volume and cohesive elements

Abstract

AbstractThis paper presents a method to simulate fracture propagation in a damage zone in 2D, whereby Cohesive Zone (CZ) elements are assigned the same Continuum Damage Mechanics (CDM) model as their adjacent finite elements. Material hardening is a result of damage‐induced stiffness reduction in the finite and cohesive elements, while softening is modeled by cohesive debonding only. The damage components calculated at the numerical integration points of each finite element are averaged and that average is assigned to the nodes of the adjacent CZ elements. CZ element debonding triggers when a critical damage threshold is reached, beyond which, a linear softening law is used in both mode I and mode II. The proposed model is calibrated against published triaxial compression tests conducted on shale. Single‐CZ element simulations confirm that, below the critical damage threshold, elastic deformation energy is stored and energy is dissipated by damage propagation and irreversible deformation. Passed the critical damage threshold, stored elastic energy is released in the form of cohesive debonding energy. Borehole breakout simulations indicate that the proposed CDM‐based CZ model can predict the formation of spiral‐shaped fractures around a free circular cavity under biaxial stress. Simulations of fracture propagation in textured materials suggest that cohesive debonding within and between grains is triggered by the coalescence of localized zones of continuum damage, and that the grain size distribution affects both the fracture pattern and the softening behavior of the specimen considered.