Abstract
AbstractSummary: Extraction of residual monomer from a latex product with supercritical carbon dioxide ((sc)CO2) in a column was studied. Operating conditions were chosen at 35 °C and 100 bar. For reducing the residual styrene level in a polystyrene latex from 104 ppm to 100 ppm and from 104 ppm to 10 ppm, a countercurrent bubble column with latex as continuous and (sc)CO2 as dispersed phase is suggested. Monomer partitioning was demonstrated to be a key parameter in the equipment design. Monomer transport was found to be governed by the shuttle effect, caused by Brownian motion of the latex to and from the H2O/CO2 interface. The drift‐flux approach was followed to determine the column flooding conditions. Small column volumes are obtained. (sc)CO2 is a promising extraction medium for residual monomer reduction in latex products. Performance towards steam stripping is better as the final residual monomer level becomes lower.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
