Relative position determination of a lunar rover using the biased differential phase delay of same-beam VLBI

Abstract

When only data transmission signals with a bandwidth of 1 MHz exist in the rover, the position can be obtained using the differential group delay data of the same-beam very long baseline interferometry (VLBI). The relative position between a lunar rover and a lander can be determined with an error of several hundreds of meters. When the guidance information of the rover is used to determine relative position, the rover’s wheel skid behavior and integral movement may influence the accuracy of the determined position. This paper proposes a new method for accurately determining relative position. The differential group delay and biased differential phase delay are obtained from the same-beam VLBI observation, while the modified biased differential phase delay is obtained using the statistic mean value of the differential group delay and the biased phase delay as basis. The small bias in the modified biased phase delay is estimated together with other parameters when the relative position of the rover is calculated. The effectiveness of the proposed method is confirmed using the same-beam VLBI observation data of SELENE. The radio sources onboard the rover and the lander are designed for same-beam VLBI observations. The results of the simulations of the differential delay of the same-beam VLBI observation between the rover and the lander show that the differential delay is sensitive to relative position. An approach to solving the relative position and a strategy for tracking are also introduced. When the lunar topography data near the rover are used and the observations are scheduled properly, the determined relative position of the rover may be nearly as accurate as that solved using differential phase delay data.