Abstract
AbstractThe delicate design of efficient air electrodes is conducive to improving the reaction kinetics and operational durability of protonic ceramic electrochemical cells (PCECs) at intermediate‐low temperatures. Here, a series of high‐order Ruddlesden–Popper (RP) perovskite electrodes are developed via the regulation of Ni/Co ratio and porosity for efficient charge/gas transfer. As verified by structural analysis and electrochemical characterizations, the electrode with a composition of Pr4Ni1.8Co1.2O10‐δ (PNCO64) shows the most matchable thermal expansion behavior with electrolytes, and highest electrical conductivity, and best catalytic activity toward oxygen reduction/evolution reactions. The Ni/Co ratio of 6:4 can induce the formation of an optimized amount of Pr6O11 in PNCO64, which is likely the pivotal source of the improved catalytic activity. When implemented on PCECs, the PNCO64 electrodes with the addition of 5% graphite pore‐former achieve a remarkable peak power density (1.18 W cm−2) and a high current density of 2.08 A cm−2 at 1.3 V at 600 °C. Excellent durability in fuel cell mode (≈85 h) and electrolysis mode (≈92 h) is also accomplished in PCECs at 600 °C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.