Abstract

Regional information on stream discharge is needed in order to improve flood estimates based on the limited data availability. Regional flood estimation is fundamental for designing hydraulic structures and managing flood plains and water resource projects. It is essential for estimating flood risks during recurrent periods due to suitable distributions. Regional flood frequency analysis is crucial for evaluating design flows in ungauged basins, and can complement existing time series in gauged sites and transfer them to ungauged catchments. Hence, this study aims to perform a regional flood frequency analysis of the Genale–Dawa River Basin of Ethiopia using the index flood and L-moments approach for sustainable water resource management. Three homogeneous hydrological regions were defined and delineated based on homogeneity tests from data of 16 stream-gauged sites, named Region-A, Region-B, and Region-C. The discordancy index of regional data for L-moment statistics was identified using MATLAB. All regions showed promising results of L-moment statistics with discordance measures (discordance index less than 3) and homogeneity tests (combined coefficient of variation (CC) less than 0.3). L-moment ratio diagrams were used to select best fit probability distributions for areas. Generalized extreme value, log-Pearson type III, and generalized Pareto distributions were identified as suitable distributions for Region-A, Region-B, and Region-C, respectively, for accurately modeling flood flow in the basin. Regional flood frequency curves were constructed, and peak flood was predicted for different return periods. Statistical analysis of the gauged sites revealed an acceptable method of regionalization of the basin. This study confirms that the robustness of the regional L-moments algorithm depends on particular criteria used to measure the performance of estimators. The identified regions should be tested with other physical catchment features to enhance flood quantile estimates at gauged and ungauged sites. Henceforth, this study’s findings can be further extended into flood hazard, risk, and inundation mapping of identified regions of the study area. Furthermore, this study’s approach can be used as a reference for similar investigations of other river basins.

Highlights

  • IntroductionA reliable determination of maximum discharge at the concerned site is crucial [1,2]

  • In most hydrological analyses, a reliable determination of maximum discharge at the concerned site is crucial [1,2]

  • The degree of homogeneity of a region was proposed based on site characteristics and the L-moment ratio diagram (LMRD) of flood statistics

Read more

Summary

Introduction

A reliable determination of maximum discharge at the concerned site is crucial [1,2]. Determining flood discharge is vital in planning, development, and sustainable management of water resources in order to assess the flood protection facilities [7,8,9,10,11,12]. This is because accurate flood estimation is used for flood risk assessment, proper planning, and design of a given project [13,14]. Accurate estimation of floods challenges limitations in data and information— in regions where the length of records is usually too short to ensure reliable quantile estimates [16,17,18,19,20,21,22,23,24]

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call