Abstract
ABSTRACT This study explored the potential of electroplating sludge (ESs) as a novel and effective photocatalyst for the photodegradation of ciprofloxacin in aqueous solutions. The characterization of the ESs was evaluated using sophisticated techniques, such as XRD, SEM, TEM, EDX, FTIR, and BET. ESs-derived photocatalyst materials were found to primarily consist of various metal oxides (Ni-O, Cu-O), which can absorb ultraviolet or visible light. The effectiveness of photodegradation was assessed by measuring the decomposition of Ciprofloxacin (CIP) in aqueous solutions. The results showed that after 180 minutes of UVA illumination, a remarkable photodegradation effectiveness of 93.87% was achieved for a CIP concentration of 10 mg L−1, pH = 9, catalyst dose of 1.0 g/L indicating ESs as an effective method for removing CIP from wastewater. The effect of other factors, such as other antibiotics, dyes, and phenol, were also carried out to illustrate high dominant capacity in the degradation of organic compounds. The radical scavenger demonstrated that h + and O2 ●− are the main species for the degradation of CIP. This research presents an adaptable, scalable framework for sustainable electroplating sludge reuse. The easily implementable method promises widespread adoption, enhancing sustainability and resource efficiency by repurposing the treated waste as a photocatalyst for antibiotic degradation. Implications Statement This research investigates the potential of electroplating sludge (ESs) as a sustainable and effective photocatalyst for the degradation of ciprofloxacin (CIP) in wastewater. The study demonstrates that ESs, containing photoactive metal oxides, can effectively degrade CIP under ultraviolet light irradiation. This research suggests that ESs offer a cost-effective and environmentally friendly approach to wastewater treatment, promoting a circular economy. The findings contribute to the development of sustainable solutions for a cleaner and safer environment.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have