Reconsideration of the fatigue tests for asphalt mixtures and binders containing high percentage RAP

Abstract

When applying reclaimed asphalt technology in a flexible pavement project, most performance concerns are related to low temperature and fatigue cracking since the stiffness of the HMA mixture could dramatically increase through adding a high percentage of reclaimed asphalt pavement (RAP) material. The purpose of this study is to evaluate asphalt mixtures with high RAP contents, prepared using two RAP addition methods, for their performance based on fatigue-cracking resistance rather than relying on volumetric properties. Asphalt mixture samples were prepared with three RAP binder content replacement percentages (30, 40 and 50%) using two preparation methods: the as-is RAP gradation (traditional method) and the splitting of the RAP gradation into coarse and fine fractions (fractionated method). Asphalt mixture beam fatigue and binder fatigue time-sweep tests were performed. Beam fatigue samples also underwent freeze–thaw cycling for freeze–thaw damage evaluation. Rather than basing the performance based solely on S–Nf curves to illustrate the fatigue performance, the beam fatigue test data was analysed through a dissipated energy approach. Faster fatigue degradation was observed for the 40% RAP binder and beam mixture when subjected to repeated loading. From a morphology aspect, this can be explained by the binder’s phase separation and physical hardening effects.