Abstract
BackgroundDroplet impact on a superhydrophobic cylinder differs from that on a flat surface. After bouncing, once re-touch takes place, the contact time τc would increase, which is unfavorable for some applications. The increased τc may strongly depend on the Weber number and radius ratio, R*, of cylinder to droplet. MethodsThe impact is investigated via lattice Boltzmann method simulations. The particular emphasis is placed on re-touch rebound patterns and τc. Significant findingsRebound patterns and τc both strongly depend on a combined parameter, α=We/R*, characterizing the asymmetry of droplet spreading and retraction. As α increases, upward rebound and stretched breakup take place sequentially for the first bouncing, whereas rebound patterns change as intact re-touch rebound and separate re-touch rebound for the second bouncing. Increasing α enhances the asymmetry, which promotes the first rebound, thereby reducing τc regardless of rebound patterns. The enhanced asymmetry also accelerates rebound and thus reduces τc in the separate re-touch rebound regime, whereas it hinders rebound, leading to a significantly increased τc. The power-law correlations of τc vs α are developed for the first and second bouncing. Besides, a method is proposed to suppress or prevent the re-touch, which is proven to effectively reduce τc.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of the Taiwan Institute of Chemical Engineers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.