Abstract
The scarcity of good quality coking coal for the blast furnace (BF) has made steel makers look for an alternative iron-making process that requires little or no coke. The Corex process has been developed as an alternative to BF iron-making, which uses non-coking coal and a small amount of coke as fuel, and pellet/lump ore as iron-bearing feed. JSW Steel operates two Corex units each of 0⋅8 Mtpa, commissioned in 1998 and 2001 respectively. Iron oxides and non-coking coals have to meet certain physical, chemical and high temperature properties for stable operation and to attain high performance levels. Experience of the Corex operation with various coals and iron oxides over the years has helped in understanding the influence and sensitivity of raw materials on its performance and develop new raw material specifications. Statistical analysis of plant data showed that the significant parameters affecting fuel rate and production are moisture, volatile matter, char strength after reaction of coal, reduction disintegration index (RDI; %, –6⋅3 mm) of pellets and slag rate. This helped achieve the most efficient operating parameters, surpass rated capacity and utilise steel plant waste. The present paper brings out the impact of various raw material properties, and the modified specifications of coal and iron oxides for Corex.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.