Random-access memory coding in the Verilog description language for solving problems in radio electronics and mechanical engineering

Abstract

The article proposes a variant of writing an algorithm for the operation of a device used in a field-programmable gate array on the example of random-access memory coding using the Verilog hardware description language. When performing the work, the Xilinx software is used, which allows working with the project at all stages of creating and describing the operation of the device logic. The practical significance of the work is the study and solution of the simplest problems in the development of modern radioelectronic rapid response devices in the Verilog hardware description language, such as coding a field-programmable gate array itself, writing test debugging code, setting input and output signals, sync pulse, reset and enable signals, describing the logic of devices such as counters, switches, registers and triggers, as well as simulating a finished project to assess the correct operation of the programmed device. This work can be used not only for teaching students of higher educational institutions in the field of development, debugging and coding of electronic and radio-electronic devices in terms of describing the algorithm of their work, but also for organizing laboratory work on courses of disciplines related to this topic, and for creating and designing real devices in production. The introduction and study of this programming language are conducted within the walls of one of the leading engineering universities of the Russian Federation — the Bauman Moscow State Technical University.