Abstract
Surface particles on multiarc ion plated coatings are common defects, and their influence on the service performance of coatings is rarely defined. The CrAlN coatings were deposited on the tungsten steel (YG8) substrates using multiarc ion plating. The effects of the substrate bias voltages and nitrogen flow rates on the quantity of the surface particles were investigated, and the influence of the surface particles on the corrosion resistance of the coatings is quantitatively characterized. The morphology of surface particles was characterized using a scanning electron microscope. The quantity of the surface particles was counted by image software. The corrosion resistance of the coatings was evaluated through an electrochemical workstation. The results show that the quantity of surface particles decreased with the increase in the substrate bias voltage and nitrogen flow rate. The corrosion resistance of the coatings showed a positive correlation with the quantity of the surface particles, and it decreased dramatically when the quantity of the surface particles exceeded 111/10 000 μm2. The corrosion mechanism of the coatings was attributed to the defect-induced pitting corrosion.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call