Abstract

This study is to inspect the voids between the concrete containment building and the containment liner plate (CLP) in the light-water reactor type nuclear power plant with lock-in thermography (LIT) inspection technology. For that, a finite element method (FEM) model containing concrete voids was created, and the thermal distribution change of the CLP surface was simulated through numerical analysis simulation of various LIT inspection conditions and converted with real-time thermography data. For the simulated temperature distribution image and the amplitude and phase images calculated by the four-point method, the signal-to-noise ratio (SNR) is analyzed based on the sound area and void areas. As a result, the difference in SNR according to the size of voids was remarkable, and the effective detectable period (EDP), which was common to each inspection condition, was derived. Furthermore, a CLP concrete mockup identical to the model shape is produced, and the thermal image of the EDP is analyzed through the experiment with the same analysis technique, and the results are compared. Although there are some differences between the numerical analysis conditions and the experimental environments, the deduction and utilization of EDP through FEM simulation are considered useful approaches to applying LIT to inspect concrete voids on the back of the CLP.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call