Abstract
In this study, polymer modified bitumen (PMB) from polyester polyols was prepared by bis(2-hydroxyethyl terephthalate) (BHET) which was obtained by glycolysis of Polyethylene terephthalate (PET) waste. The effect of polyester polyol structure on the rheological properties of PMB was investigated. Polyester polyols obtained by the reaction of various polyols and polycarboxylic acids. POL1, synthesized from BHET and adipic acid (AA), were blended with the bitumen resulting in improved stiffness, rutting resistance and fatigue performance with respect to neat bitumen. Also, the synergistic effects of the polyester polyol addition into styrene-butadiene-styrene modified bitumen (SBS-Bitumen) were investigated where this reference mixture contains SBS loading of 3 % according to the weight of bitumen. Although the addition of POL1(1.3:1) into SBS:Bitumen mixture at 3:3:94 weight ratio didn’t alter the high temperature performance grade of PMB, POL1:SBS:Bitumen exhibited higher softening point, elastic recovery and rutting parameter than reference mixture. The early stage promising results of this study indicated the potential benefits of polyester polyol as bitumen modifier. Also, this study showed that the use of BHET obtained by PET waste as a starting material for polyester polyol synthesis could be an alternative way to utilize plastic waste.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Anadolu University Journal of Science and Technology-A Applied Sciences and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
