Abstract
Atrazine is a concerning water sources contaminant that can remain at the drinking water. The objective of this study is to evaluate the efficiency of point of use (POU) filters with granular activated carbon to remove the contaminant, when added to deionized and natural well water under the theoretical concentrations of 1000.0 ng.L-1. The procedure used to quantify atrazine was the High-Performance Liquid Chromatography (HPLC), preceded by pre-concentration of the contaminants by solid phase extraction (SPE). Coconut carbon was evaluated, through preliminary tests carried out in "jar test" equipment, in order to obtain kinetic parameters, according to Freundlich equation. The parameters were inserted into a design model used in a complementary phase of the study, which evaluated the efficiency of filter prototypes in the removal of the contaminant in dynamic conditions. The results showed that the prototype filter, constructed from 90.0 g of coconut coal, which presented the highest efficiency for the removal of target pollutant in the preliminary trials, were able to reduce average 57.2% of atrazine after 1000.0 liters filtered, under predetermined operating conditions: flow rate 100 L.h-1 in continuous test. The filter prototypes were designed from the following Freundlich isotherms coefficients: qmax = 40.4 ng atrazine / mg carbon (maximum adsorption capacity); 1/n = 0.5138 and KF = 1.10, with correlation coefficient of 0.9960.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
