Pixel scaling for SOI-diode uncooled infrared focal plane arrays

Abstract

Pixel scaling for SOI diode uncooled infrared focal plane arrays (IRFPAs) was investigated in order to achieve the realization of small size and low cost IRFPAs. Since the SOI diode pixel has two different layers -- one for the temperature sensor and the thermal isolation structure, and the other for the infrared absorption structure -- each layer can be independently designed. Hence, a high fill factor can be maintained when reducing pixel size without changing the basic structure of the pixel, which is advantageous in reducing the pixel size. In order to verify this, the authors have developed an SOI diode IRFPA with the pixel size of 28 μm x 28 μm which is 49% of the previous pixel size (40 μm x 40 μm) and achieved a noise equivalent temperature difference (NETD) of 87 mK. In order to further reduce the pixel size and to improve device sensitivity, we propose a new pixel structure. In this structure, a reflector is fabricated between the infrared absorption structure and support legs. Therefore, the infrared rays which are incident on the support legs, which do not sufficiently function as a reflector, can be used effectively. A new pixel structure with a pixel size of 25 μm x 25 μm was fabricated and realized the thermal conductance of 1.0 x 10^-8 W/K and the infrared absorption structure was then verified for its effectiveness.