Abstract

AbstractPolymer based piezoelectric materials are increasingly used because of their lightweight and flexibility. To understand the effects of different dimensional carbon nanomaterials on the properties of polyvinylidene fluoride‐hexafluoropropylene (PVDF‐HFP) based composites, carbon black (CB), carbon nanotube (CNT), and few‐layer graphene (FLG) were used to reinforce PVDF‐HFP for preparing different composites, respectively. Their piezoelectric, mechanical, and crystallographic properties were tested. The results show that CB/PVDF‐HFP composite film has the best piezoelectric property, successively followed by FLG/PVDF‐HFP and CNT/PVDF‐HFP at 0.5%, 0.05%, and 0.1% contents of CB, FLG, and CNT, respectively. In the initial crystallization stage, CB better plays the best role of crystallization core, increasing the electroactive crystalline phase content and crystallization rate. The appropriate contents of CNT and FLG promote the formation of β crystalline phase. In the polarization stage, CB forms a uniform nonconductive network in the composite film and shows the best polarization effect. CNT tends to form connections and has the worst polarization effect. FLG forms a “microcapacitor” structure to enhance the local polarization effect. The effects of CB, CNT, and FLG on crystalline phase changes and piezoelectric property enhancements of PVDF‐HFP based composites are mainly due to their differences in size, morphology, and quantity.Highlights Effects of CB, CNT, and FLG on the piezoelectricity of PVDF‐HFP are investigated; CB more obviously increases the piezoelectricity of PVDF‐HFP than CNT and FLG; α, β, and γ crystalline phase changes in PVDF‐HFP based composites are understood; CB forms smaller and more uniform crystal cores in PVDF‐HFP than CNT and FLG; CB markedly increases the contents of electroactive crystalline phases in PVDF‐HFP.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call