Abstract
Piezoelectric composite structures have been studied to optimize energy harvesting and charging performance. Here, a specific piezoelectric composition of 0.4Pb(Zn1/3Nb2/3)O3–0.6Pb(Zr0.5Ti0.5)O3 (PZN–PZT) has been selected for better energy harvesting performance. Different contents of PZN-PZT nanoparticles of ∼54 nm were embedded into a matrix of poly(vinylidene fluoride–trifluoroethylene) [P(VDF–TrFE)] by a single electrospinning process. The single-phase perovskite nanoparticles were initially prepared by combustion synthesis with the assistance of polyacrylic acid (PAA) as a fuel. The enhanced energy harvesting performance of flexible composite nanogenerators was ascertained by exhibiting ∼3.4 V output voltage and ∼240 nA output current for the 20 vol% nanoparticles-incorporated single sheet. The charging capability was found to be enhanced by designing the stacked nanofiber composite sheets in series, suggesting that the rate of charging and the saturation voltage are dependent on the number of composite sheets in series. For instance, the double stacked sheets exhibited a ∼5.7 V charging capability within ∼150 s.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.