Abstract
Incorporating thermally labile polymer-based additives is a facile and practical approach in developing superior carbon membranes. In this study, three different thermally labile polymers, microcrystalline cellulose (MCC), nanocrystalline cellulose (NCC), and polyvinylpyrrolidone (PVP), were introduced separately to P84-copolyimide (PI) solution as additive and their impact on membrane performance were investigated. Firstly, NCC was added as the membrane pore former for hydrogen gas (H2) separation. The addition of NCC significantly increased pore channels in the membrane, hence contributed to high gas permeance and selectivity. The tests involving pure H2 and N2 permeation were carried out at room temperature. Carbon membranes carbonized at a final temperature of 800°C with the heating rate of 3°C/min under Ar flow achieved the greatest H2/N2 selectivity of 434.68±1.39, hence proving the potential of NCC as a good additive.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.